Track plate under brake discs change total height VW and Audi models 8mm brake conversion
€148.32*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
2x track plates, which are mounted under the brake disc, made of high-strength aluminum.
These are used to install brake discs from the Mercedes series, which have too great an overall height and a smaller center centering and would therefore rub against the wheel carrier. Our plates bring the brake disk 8 mm closer to the rim.
The track plates are perfect for the complete VW and Audi series with 68mm brake disc centering on the wheel hub in order to use brake discs with 5x112 bolt circle and 64.8mm hub bore, which have a large overall height and could not be used otherwise.
The matching brake caliper adapters for this track plate can be found in the matching accessories for this adapter plate
Thanks to the TÜV certificate (technical report) included in the scope of delivery, registration can be carried out via individual approval.
Technical data:
- Thickness of the plate: 8mm
- Bolt circle: 5x112
- Brake disc centering vehicle: 64.8mm
- Rim centering vehicle: 57.1mm
- Centering for new brake disc 68mm
Delivery:
- 2x high-strength aluminum plates 8mm for VW and Audi models with 68mm brake disc centering on the wheel hub
- TÜV certificate for registration
- Material certificate
Technical data:
Login
4 August 2018 09:32
marv0012013
Alles super. Top Produkt.
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- ✓ 330x22 4F0615601F 240122-02231 Audi A6 brake disc
- ✓ 1-piston Lucas Girling 43 brake caliper
- ✓ rear axle
- ✓ 370x32 8J0615301F TTRS brake disc
- ✓ 4-piston 8J0615107 / 8J0615108 TTRS brake caliper
- ✓ front axle
- ✓ VW Passat 3B 3BG Audi A6
- ✓ Better directional stability
- ✓ Easy installation