What diameter do I need for my vehicle?

Since the vehicles have tolerances on the tie rods, we cannot make an exact statement about which exact diameter is required.Therefore, you need to measure the diameter of the tie rod on your vehicle.

What is the outer diameter of the two steering limiters?

The steering angle limiters for 28mm shafts have an outer diameter of 40mm

Do I need to dismantle the handlebar for this?

No, you don't have to. Our impact limiters are designed so that you only need to loosen the cuffs and then simply place them over from the top and bottom.

Is there a rough overview of how much the respective widths contribute to the steering angle?

Unfortunately, there is no general overview as it varies depending on the steering angle and vehicle. However, you can also reposition the limiters on the bar and, if necessary, use washers or bushings, allowing the steering angle to be perfectly adjusted to your needs.

Lenkeinschlagbegrenzer Lenkanschlagbegrenzer Edelstahl VW Golf Audi A3 Opel Lenkstange - Durchmesser: 24mm

Steering angle limiter / turning angle reducer / made of stainless steel for all vehicle with 24 mm diameter steering linkage, e.g:

VW, Audi, BMW, Seat, Opel, Ford, usw.

The steering angle limiter can be mounted on any vehicle with a 24 mm diameter steering linkage (on request, possible for other diameters).

Thanks to our turning limiters, there is no need to completely take the steering apart: saving time and money!

We have integrated 2 set screws on our steering limiters so that the 2 halves of the limiter are perfectly sysmetric. This ensures a perfect stability.

The set screws must be stabilized with lock nuts.

Delivery:

2x steering angle limiters / turning angle reducers / made of stainless steel Ø=24mm / thickness 15mm for VW, Audi, BMW, Seat, Opel, Ford, etc,.
2x set screws

Our drive shafts are registration-free and therefore do not need to be registered.

Steering Angle Limiter Turning Angle Reducer Stainless - Thickness: 15mm - Diameter: 24mm

Delivery:

Login