.png?ts=1749194267)
.png?ts=1749194267)
Bremssatteladapter Audi 80 Urquattro Typ 85 Umbau Porsche 996 Carrera 4S 320x30 Bremsscheiben Tuning Adapter
- ✓ 320x30 A2464212712 Mercedes GLA brake disc
- ✓ 4-piston 996351429 / 996351430 Porsche 996 Carrera 4S brake caliper
- ✓ front axle
£363.60*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
⚠️ Important Notice:
This item is produced exclusively upon request. As it is a made-to-order special production based on demand, there is no right of withdrawal pursuant to § 312g (2) No. 1 of the German Civil Code (BGB).
Therefore, returns or exchanges are excluded.
Brake caliper adapter to mount the brake calipers from the 996 Carrera 4S in conjunction with the Mercedes GLA 320x30 brake disc on the Audi 85 Urquattro.
Adapters are suitable for the following Audi models:
- Audi 80 Urquattro
Advantages of this brake system:
- Top deceleration values, no comparison with conventional rear brake discs
- Significantly improved fading due to internally ventilated discs
- a must for performance upgrades
- thanks to the material certificate included in the scope of delivery, registration via individual approval is also possible for standard vehicles.
Required components:
- Brake callipers from 996 Carrera 4S left Porsche part number 996.351.429, brake calliper right Porsche part number 996.351.430
- Brembo part number left: 20.7310.03 right: 20.7310.04
- Brake discs 320x30 from Mercedes GLA: A 246 421 27 12
Scope of delivery:
- 2x brake calliper adapter for Audi 85 Urquattro
- complete high-strength mounting screw set
- material certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 1.8 S quattro | 894|88PS(65KW) |
| 1.8 quattro | 894|113PS(83KW) |
| 1.8 S quattro | 8A2|88PS(65KW) |
| 1.8 quattro | 8A2|113PS(83KW) |
| 2.0 quattro | 893|112PS(82KW) |
| 1.8 S quattro | 893|90PS(66KW) |
| 2.0 quattro | 8A2|115PS(85KW) |
| 2.0 quattro | 894|115PS(85KW) |
| 1.8 S quattro | 893|88PS(65KW) |
| 2.0 quattro | 8A2|112PS(82KW) |
| 2.0 quattro | 893|115PS(85KW) |
| 1.8 quattro | 893|113PS(83KW) |
| 1.8 S quattro | 8A2|90PS(66KW) |
| 1.8 S quattro | 894|90PS(66KW) |
| 2.0 quattro | 894|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 2.0 20 V quattro | 8A2|160PS(118KW) |
| 2.0 20 V quattro | 894|160PS(118KW) |
| 2.0 20 V quattro | 893|160PS(118KW) |
| Motor | Motorcode |
|---|---|
| 1.8 S quattro | 894|88PS(65KW) |
| 1.8 quattro | 894|113PS(83KW) |
| 1.8 S quattro | 8A2|88PS(65KW) |
| 1.8 quattro | 8A2|113PS(83KW) |
| 2.0 quattro | 893|112PS(82KW) |
| 1.8 S quattro | 893|90PS(66KW) |
| 2.0 quattro | 8A2|115PS(85KW) |
| 2.0 quattro | 894|115PS(85KW) |
| 1.8 S quattro | 893|88PS(65KW) |
| 2.0 quattro | 8A2|112PS(82KW) |
| 2.0 quattro | 893|115PS(85KW) |
| 1.8 quattro | 893|113PS(83KW) |
| 1.8 S quattro | 8A2|90PS(66KW) |
| 1.8 S quattro | 894|90PS(66KW) |
| 2.0 quattro | 894|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 2.0 20 V quattro | 8A2|160PS(118KW) |
| 2.0 20 V quattro | 894|160PS(118KW) |
| 2.0 20 V quattro | 893|160PS(118KW) |
- ✓ 320x30
- ✓ 15mm centering
- ✓ 51mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C