Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Bremssattel Adapter Audi A5 TTRS RS3 Audi TT Bremsanlage Bremssattel Adapter 370x32

  • ✓ 370x32 8J0615301F TTRS brake disc
  • ✓ 4-piston 8J0615107 / 8J0615108 TTRS brake caliper
  • ✓ front axle

Bremssattel Adapter für die Audi A5 Baureihe auf die TTRS Bremssättel in Verbindung mit den original TTRS Bremsscheiben.

Die Adapter passen für folgende Fahrzeuge :

  • Audi A5

Vorteile dieser Bremsanlage:

  • durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden
  • Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar
  • Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren.

Benötigte Komponenten:

  • Original TTRS Bremssättel Bremssattel links Teile Nr: 8J0 615 107 Bremssattel rechts Teile Nr: 8J0 615 108
  • Satz Bremsbeläge Teile Nr: 8J0 698 151 E
  • Bremsscheiben vom TTRS  370x32 mm Teilenummer 8J0615301F (RS3 Scheiben passen nicht, andere Topftiefe)
  • Bremsscheibenzentrierung von 65mm auf 68mm aufdrehen. 

Lieferumfang:

  • 2x Bremssattel Adapter
  • Materialzertifikat

Tips, information and hints:

  • For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
  • We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
  • In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers. >> Now directly to spacers <<
  • Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Configure steel braided brake lines <<

Technical data:

Einbauort: vorne
Lochabstand Achsschenkel: 146mm
Lochabstand Bremssattel : 180mm
Einbauort: vorne
Lochabstand Achsschenkel: 146mm
Lochabstand Bremssattel : 180mm

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form

Average rating of 5 out of 5 stars

Steel Brake Line Steel Brake Line Custom Configurator
  • ✓ Desired dimensions
  • ✓ Quickly configurable
  • ✓ Length, color and connections freely selectable

€46.95*
Item number: SF1

Average rating of 4 out of 5 stars

Brake Disc Audi TTRS 370x32 Seat Leon Zimmermann Formula Z Coat Z 100.3367.70
  • ✓ 370x32
  • ✓ 65mm centering
  • ✓ 49.8mm height

€684.28*
Item number: ZIM141
Brake disc Audi RS 330x22 Zimmermann Formula Z Coat Z 100.3366.70
  • ✓ 330x22
  • ✓ 68mm centering
  • ✓ 41mm height

€602.51*
Item number: ZIM140