BMW E39 5th Adapter Porsche Panamera 4-piston Brake Caliper E60 M5 370x24 Brake Disc Tuning Adapter Rear Axle
- ✓ 370x24 34212282807 / 34212282808 BMW E60 M5 brake disc
- ✓ 4-piston 970352425 / 970352426 Porsche Panamera brake caliper
- ✓ rear axle
€189.50*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, rear axle, on models BMW E39, for conversion to the Brembo 4-piston Porsche Panamera brake caliper, combined with the 370x24mm BMW E60 M5 brake discs.
Advantages
- High deceleration
- Thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles
- Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
- screws are included
Required components:
- brake disc; BMW E60 M5 mit 370x24 mm, reference 34212282807 / 34212282808
- brake caliper: 4-piston Porsche Panamera, reference 970.352.425 / 970.352.426 which was originally installed with 350x28mm brake disc (Porsche Panamera 4.8 GTS with 440 HP and with all 4.8 Turbo from 500-570 HP)
- For the brake calipers that were installed with a 330mm brake disk (also with part number: 970.352.425 / 970.352.426, only different shaft length) we have this adapter in our range (click here)
Delivery:
- 2x brake caliper adapters for BMW E39
- high strength screw kit
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
17 December 2021 18:19
NICO B
.
23 July 2023 11:44
Paul R
Die Adapter sind sehr gut gefertigt, es muss jedoch beachtet werden, dass es sehr viele verschiedene Sättel für die Hinterachse gibt. Hier bitte genau suchen, dann passt auch alles. Besonders empfehlen kann ich epytec mit dem großartigen Service.
30 April 2021 03:07
Gianluca G
Extremely high quality part, with perfect fitment on point. Awesome idea for a big Brake Kit
20 July 2023 11:59
19cnote8
Super high quality
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 374x36 34112282806 BMW E60 M5 brake disc
- ✓ 6-piston 34117845747 / 34117845748 BMW M6 F10 brake caliper
- ✓ front axle
- ✓ 374x36 34112282806 BMW E60 M5 brake disc
- ✓ 6-piston A2054216998 Mercedes W205 C6 brake caliper
- ✓ front axle
- ✓ 370x24
- ✓ 75mm centering
- ✓ 62mm height
- ✓ 374x36 34112282806 BMW E60 M5 brake disc
- ✓ 6-piston 34117845747 / 34117845748 BMW M6 F10 brake caliper
- ✓ front axle
- ✓ for 18mm tie rods
- ✓ BMW E39 520i, 530i, 528i.....
- ✓ 100% perfect fit
- ✓ for 15mm tie rods
- ✓ BMW E39 520i, 530i, 528i.....
- ✓ 100% perfect fit
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ BMW E39 - 6 cylinders
- ✓ N54 N54B30 engine, manual transmission GS6-53BZ
- ✓ simple engine conversion
