Gesucht nach VW | Vento | 1.9 SDI | 1H2
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ accelerator pedal adapter for conversion from the original Golf MK3 pedals to Golf MK7 gas pedals
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ 1x steel strut bar / brace for rear axle on models VW Vento, Jetta 2, Golf MK2, Golf MK3 and Corrado
- ✓ wheel hubs for conversion to 5x100mm bolt circle/PCD for the front axle Golf MK2, MK3 / Cabriolet, Variant, Golf MK4 Cabriolet, Passat, Variant, Vento, Caddy 2 box, Corrado, Seat Cordoba / Ibiza 2 / Toledo 2
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ for Golf MK3 2.0 Syncro, Golf 4 Cabriolet 2.0, VW Vento 1.9 TDI, etc.
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ rear brake caliper support / carrier / bracket for VW Corrado Golf MK1/2/3 Jetta PassatPart number: 357 615 125 C
- ✓ Installation location: front
- ✓ Number of holes: 4
- ✓ Bolt circle: 100
- ✓ Diameter: 256mm
- ✓ Thickness: 20mm
- ✓ Height: 38mm
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized