Gesucht nach VW | Golf III Variant | 1.8 | 1H5
- ✓ large master brake cylinder / main brake cylinder, ideal on all models Golf MK1 Caddy Scirrocco Jetta for a brake conversion to G60 brake. Necessary in order to reach the better volumetric efficiency of the brake and the full brake pressure.
- ✓ large master cylinder / main brake cylinder, ideal on all VW models without ABS for a brake conversion to Porsche brake. Or simply to increase the original brake pressure.
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ clutch master cylinder for VW Golf MK3, Golf MK4 Cabrio Polo Caddy, etc.
- ✓ manufacturer number: 1H1721401, 1H1721401B, 1H1721401A
- ✓ wheel hubs for conversion to 5x100mm bolt circle/PCD for the front axle Golf MK2, MK3 / Cabriolet, Variant, Golf MK4 Cabriolet, Passat, Variant, Vento, Caddy 2 box, Corrado, Seat Cordoba / Ibiza 2 / Toledo 2
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ Zimmermann Brake Disc 226x10 Manufacturer's ref. 600.3219.52
- ✓ VW Golf II III IV 1.8 GTI 1.9 TDI Corrado Jetta II Passat Seat Ibiza
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ assembly position: front
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ Installation location: front
- ✓ Number of holes: 4
- ✓ Bolt circle: 100
- ✓ Diameter: 256mm
- ✓ Thickness: 20mm
- ✓ Height: 38mm
- ✓ for Golf MK3 2.0 Syncro, Golf 4 Cabriolet 2.0, VW Vento 1.9 TDI, etc.
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ hollow screw / banjo screw adapter for oil pressure sensor scwitch on VW BMW Opel models with M10x1 M12x1,5 thread 1/8 inch
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ steering angle limiter / turning angle reducer / diameter 28 mm
- ✓ steering angle limiter / turning angle reducer
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles