Gesucht nach Seat | Toledo II | 1.8 20V | 1M2
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ 1x clutch disc 240mm suitable for VW Golf MK4 1.8T GTI Bora V5 V6 Passat Audi A3 A4 A6 TT Seat Leon Ibizia
- ✓ transmittable torque [Nm]: 600
- ✓ diameter [mm]: 240
- ✓ number of teeth: 23
- ✓ hub profile: 21,8x24 2-23N
- ✓ torsion spring clutch disc with sinterpad clutch coating/lining
- ✓ lightened flywheel for VW Golf MK4 Bora Audi A3 S3 TT Seat Leon & Ibiza. Models with 1,8 T 20 V turbo engine and 240 mm clutch
- ✓ total weight: 5,0 kg / saving weight compared to the original: 7,0 kg
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ wheel hubs for conversion to 5x112mm Pitch Circle Diameter (PCD), rear axle on Front WD models like Golf MK 4 Bora Audi A3 TT TTRS RS3 Audi TT
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ reinforced Sachs Motorsport pressure plate for: VW Golf MK4 1.8T GTI Bora V5 V6 Passat Audi A3 A4 A6 TT Seat Leon Ibizia 240mm
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Zimmermann Brake Disc 280x22 Manufacturer Number 600.1601.20
- ✓ VW Golf GTI G60 Corrado Seat Cordoba Syncro
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ complete bolt /pitch circle conversion kit for front axle to bolt/pitch circle 5x112
- ✓ Golf MK4, Bora, New Beetle, Audi A3, TT
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ Zimmermann Brake Disc 280x22 Manufacturer's ref.: 100.1234.52
- ✓ VW Golf 4
- ✓ for VW Golf MK 4, Bora 1.6 16V, Audi A3 1.6, Seat Toledo 2 1.6 16V, Skoda Octavia 1 1.9 SDI, etc
- ✓ control arm suspension / wishbone with bushing, axle joint and tie / steering rods
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ for VW Golf MK 4, Bora 1.6 16V, Audi A3 1.6, Seat Toledo 2 1.6 16V, Skoda Octavia 1 1.9 SDI, etc
- ✓ control arm suspension / wishbone with bushing, axle joint, steering bar / rod and track rod
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ Zimmermann Brake Disc 280x22 Manufacturer's ref.: 100.1234.20
- ✓ Audi VW A3 1.9 TDI quattro Golf 1.8 T GTI Seat Skoda
- ✓ Zimmermann Brake Disc 288x25 Manufacturer Number 100.1235.52
- ✓ VW Golf 4 Polo Bora Audi A1 Seat Leon Skoda Octavia 1
- ✓ assembly position: rear
- ✓ suitable for Audi A6 Avant 3.0 quattro
- ✓ assembly position: rear
- ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI