2xAudi A3 VW Bora Variant Golf 4 Variant New Beetle brake disc Zimmermann Sport 280x22 100.1234.52

Brake caliper adapter, rear axle, on all models front-wheel drive Golf MK4,  Bora, Vento, Audi A3, etc, for conversion to Porsche brake caliper, combined with Golf MK4 brake disc, front, 280x22. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf MK4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. The track is widened by 16mm for each side. Suitable for the following VW and Seat models: Audi A3 8L Audi A1 Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf mk4 VW Bora/Jetta mk4 VW Polo 6R WRC Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche , reference 996.352.421 + 996.352.422 brake caliper mounting bracket: rear axle , Audi S3 8L or VW Golf  R32 brake disc: Golf MK 4  280x22mm part number: 1J0 615 301 P Delivery: 2x brake caliper adapters for Porsche brake caliper 2x brake caliper mounting brackets for R32 / S3 handbrake function high strength mounting screws material certificate

Brake caliper adapter with special wheel hubs to drive the rear brake calipers from the Golf Mk4 V6 R32 Audi S3 8L, combined with the front 280mm brake discs from the VW Golf Mk4 on the rear axle. Adapters are suitable for the following VW and Seat models: Golf MK1 Golf MK2 MK3 + GTI+ VR6  Corrado  Jetta  Passat 35i  Scirrocco  Vento  Seat Cordoba  Seat Ibiza  Seat Toledo Advantages: top deceleration, without comparison with conventional brake discs, rear. only manufacturer components installed better performance supplied material certificate inexpensive procurement of spare parts thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles technology: Using the original Polo 9N wheel hubs, the 280 mm brake discs are centered and screwed. The original wheel bearings from the Polo 9N can still be used. Required components: brake caliper: left VW reference 8N0615423C,  roight VW Teilenummer 8N0615424C brake caliper mounting bracket VW reference 8N0 615 425 B or painted in blue from the R32: 1J0 615 425 F. stub axle from Polo 6N GTI (also available in our shop, item number APA213) wheel hub from Polo 9N reference: 6Q0598611 brake disc: front disc from Golf 4 280x22 mm reference: 1J0 615 301 E Delivery: 2x brake caliper adapters high-strength mounting screws material certificate

Brake caliper adapter for rear axle conversion to brake caliper of Golf MK4 V6/R32 Audi S3 8L, YoC 99, combined with the front 280 mm brake discs from Golf MK4. Suitable for the following VW and Seat models Ibiza 6L Polo 9N Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate cheap spare parts thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Required components: brake caliper: VW , reference left 8N0615423C + right  8N0615424C brake caliper support / bracket , reference 8N0615425B brake disc: VW Golf MK4 (front axle) 280x22mm  VAG reference 1J0615301E Delivery: 2x brake caliper adapters  complete mounting screws set  material certificate

Brake caliper adapter on rear axle for conversion to rear brake caliper of Porsche 996, combined with the 280 mm  VR6  front brake discs. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf MK4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following vehicles: Ibiza 6L Polo 9N Audi A1 Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate can always be restored to the original state without any problems Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The track is wider by about 16 mm per side. Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles. For the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS can be used. Required components: brake caliper Porsche 996  reference  996.352.421 + 996.352.422 brake caliper Golf 4 R32   VW reference  left  8N0615423C + right 8N0615424C brake caliper mounting bracket:  VW reference 8N0 615 425 B or painted in blue from the R32: 1J0 615 425 F brake disc: VR6 GTI 16V  280mm with cup depth 28.5mm VAG-reference: 1H0615301 and VAG-reference 1H0615301A  Delivery: 2x brake caliper adapters for conversion to Porsche 2x brake caliper adapters for installing  S3 /R32 handbrake caliper  high strength mounting screws material certificate

Bremssattel Adapter um die hinteren Bremssättel vom Porsche 996 in Verbindung mit den vorderen 280 mm G60 VR6 GTI 16V Bremsscheiben an der Hinterachse zu fahren. Adapter sind passend für folgende Modelle: Ibiza 6L Polo 9N Audi A1  Vorteile dieser Bremsanlage:  Top Verzögerungswerte! Kein Vergleich zur den herkömmlichen Bremsscheiben hinten ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert Einfach wieder in original Zustand rückrüstbar  Technik: Die Bremssattel Adapter werden zwischen Achskörper und Achszapfen montiert. Die dafür benötigten längeren Schrauben sind im Lieferumfang enthalten. Die Spur wird um ca 16 mm pro Seite breiter. Nicht im Bereich der STVO zugelassen. Durch das im Lieferumfang enthaltene Materialzertifikat kann jedoch eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden.Passend für die Vorderachse bieten wir Ihnen Bremssatteladapter für eine Umrüstung auf die Porschebremsanlage in Verbindung mit der R32 Bremsscheibe an. Schauen Sie in unserem Shop!Bei Fahrzeugen mit ABS kann das ABS weiter verwendet werden  Benötigte Komponenten: Porsche Bremssattel Teile Nr: 996.352.421 + 996.352.422 Lieferumfang: 2 Stück Bremssattel Adapter hochfestes Befestigungsschraubenmaterial Materialzertifikat

Brake caliper adapter for the rear axle on Golf 4 series for conversion to R32 / S3 brake calipers, combined with the 280mm Golf MK4 brake discs. Suitable for the following vehicles ( front wheel drive): Audi A3 8L Audi A1 Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf mk4 VW Bora/Jetta mk4 Polo 6R WRC Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc internally vented ,280x22 VW Golf 4 Audi A3 1,8 1,9TDI , reference: 1JO 615 301 E brake caliper, brake caliper support and brake pads from R32 / S3  Delivery: 2x brake caliper adapters for VW Golf 4, Audi A3 and others high-strength mounting screws (10.9) material certificate