Gesucht nach VW | Passat Variant | 2.0 Syncro | 35I, 3A5
- ✓ for all G60 GTI 16V / TDI engines
- ✓ e.g 1,8T Golf 4, Audi A3 with 5 speed gearbox
- ✓ total weight: 4,1 kg / saving weight compared to the original: 4,9 kg
- ✓ reinforced clutch release lever for all 02A and 02J 5 speed gear
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ clutch master cylinder from Passat 35I Golf MK2 GTI G60 VW Corrado, etc
- ✓ for front axle: Audi A4, A6, VW Passat YoC 1996-2005
- ✓ brake caliper: Porsche Cayenne oder VW Tuareg ( 18 inch version ), reference 95535142153 / 95535142253
- ✓ brake disc: Mercedes CLA 43 AMG 350x32mm, reference: A1764210212
- ✓ block reinforcement plate for all VW / Audi 1.8 liter 16V, G60, 1.9TDI and turbo / compressor engines with oil pump drive via auxiliary shaft
- ✓ for the following engines: MKB. PL, KR, 9A, 6A, ,AFN ABF, PG, 1H, DX, EG
The steel sheets need to be welded directly on the clutch release lever to avoid folding after installation of more resistant clutch or pressure plate.
- ✓ injection rail for conversion from 16V to G60 and turbo. Required for engine conversions with PL, KR, 9A and ABF to G60 and turbo engine block, combined with the standard intake manifold
- ✓ flywheel kit consisting of lightened flywheel, sprung sinterpad clutch disc and pressure plate in reinforced design suitable for VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02JJ
- ✓ VW Golf 2 3 Corrado G60 wishbone reinforcing plate 16V 1,8T 2,0 GTI
- ✓ wheel hubs for conversion to 5x100mm bolt circle/PCD for the front axle Golf MK2, MK3 / Cabriolet, Variant, Golf MK4 Cabriolet, Passat, Variant, Vento, Caddy 2 box, Corrado, Seat Cordoba / Ibiza 2 / Toledo 2
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ reinforced Sachs Motorsport pressure plate for VW Golf Corrado Passat G60 GTI 16V engines
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
Aluminum racing engine bracket for all types of engines and vehicles G60
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ flywheel kit, VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02J, consisting of lightened flywheel, spring-loaded, organic clutch disc and pressure plate in reinforced design
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ torsion spring clutch disc with organic performance clutch coating/lining
- ✓ transmittable torque [Nm]: 520
- ✓ diameter [mm]: 228
- ✓ number of teeth: 10
- ✓ hub profile: 23x29-10N
Hexagonal nut M08
Thread right
Galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ eccentric for article 244, galvanized
- ✓ complete brake system for front axle: Audi A4 B5 VW Passat
- ✓ brake caliper: Porsche Cayenne ZR18 / ZL18 part no. 95535142153 / 95535142253
- ✓ Brake disc: Mercedes CLA 43 AMG 350x32mm part number: A1764210212
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ assembly position: rear
- ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI
- ✓ assembly position: front
- ✓ suitable for Seat VW Cordoba Ibiza II 1.8i 16V 2.0i 16V
- ✓ torsion spring clutch disc with organic sinterpad clutch coating/lining
- ✓ transmittable torque [Nm]: 520
- ✓ diameter [mm]: 228
- ✓ number of teeth: 28
- ✓ hub profile: 20,3x22,1-28N
Hexagonal socket head cap screw high resistance with partial thread
Type: M12x65
Thread 1.5
Blank
Quality 12.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal socket head cap screw high resistance with partial thread
Type: M12x70
Thread 1.5
Blank
Quality 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal socket head cap screw high resistance partial thread
Type: M12x60
Thread 1.5
Blank
Quality 12.9
Hexagonal screw hight resistance entirely thread
Type: M16x35
Thread: 1.5
Blank
Quality: 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength