Gesucht nach Seat | Toledo I | 2.0i 16V | 1L
- ✓ for all G60 GTI 16V / TDI engines
- ✓ e.g 1,8T Golf 4, Audi A3 with 5 speed gearbox
- ✓ total weight: 4,1 kg / saving weight compared to the original: 4,9 kg
- ✓ reinforced clutch release lever for all 02A and 02J 5 speed gear
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ block reinforcement plate for all VW / Audi 1.8 liter 16V, G60, 1.9TDI and turbo / compressor engines with oil pump drive via auxiliary shaft
- ✓ for the following engines: MKB. PL, KR, 9A, 6A, ,AFN ABF, PG, 1H, DX, EG
The steel sheets need to be welded directly on the clutch release lever to avoid folding after installation of more resistant clutch or pressure plate.
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ injection rail for conversion from 16V to G60 and turbo. Required for engine conversions with PL, KR, 9A and ABF to G60 and turbo engine block, combined with the standard intake manifold
- ✓ Drive shaft set for Golf 2 Golf 3 Jetta 2 Seat Toledo 1 (narrow axle) stable up to 800 hp.
- ✓ drive shaft kit for all VR6 ,16V , 1.8T conversion with 02M 02Q 6-speed gearbox and narrow axle with front-wheel drive stable up to 800HP
- ✓ VW Golf 2 3 Corrado G60 wishbone reinforcing plate 16V 1,8T 2,0 GTI
- ✓ flywheel kit consisting of lightened flywheel, sprung sinterpad clutch disc and pressure plate in reinforced design suitable for VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02JJ
- ✓ for front axle VW Golf MK3 Vento Toledo VR6 16V
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ wheel hubs for conversion to 5x100mm bolt circle/PCD for the front axle Golf MK2, MK3 / Cabriolet, Variant, Golf MK4 Cabriolet, Passat, Variant, Vento, Caddy 2 box, Corrado, Seat Cordoba / Ibiza 2 / Toledo 2
Aluminum racing engine bracket for all types of engines and vehicles G60
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ reinforced Sachs Motorsport pressure plate for VW Golf Corrado Passat G60 GTI 16V engines
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ flywheel kit, VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02J, consisting of lightened flywheel, spring-loaded, organic clutch disc and pressure plate in reinforced design
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ wheel hub conversion for 5x112 pitsch circle diameter (PCD) on front axle for VW Golf MK2 MK3, Passat Corrado with VR6 axle
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ eccentric for article 590 galvanized
- ✓ torsion spring clutch disc with organic performance clutch coating/lining
- ✓ transmittable torque [Nm]: 520
- ✓ diameter [mm]: 228
- ✓ number of teeth: 10
- ✓ hub profile: 23x29-10N
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ drive shaft kit for Golf MK2 Jetta 2 Seat Toledo 1 (small axle) up to 800 HP stable.
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ Joint set for the 6-speed 02M 02Q transmission
- ✓ Also suitable for our drive shafts for the 02M 02Q transmission
- ✓ drive shaft kit for all Golf MK2 Jetta 2 Seat Toledo 1 (narrow axlw), stable up to 800 HP.
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ Zimmermann sports brake disc 280x22 Manufacturer's ref. 600.1606.52
- ✓ VW Golf VR6 GTI Corrado Seat Toledo
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D