Gesucht nach Opel | Vectra A | 2.0i | 86, 87
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ reinforced Sachs Motorsport pressure plate for Opel 2,0l 16V c20xe Kadett Corsa Vectra Astra Ascona Manta 228mm
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ Torsion-sprung clutch disc with sinter pad clutch lining
- ✓ Transmittable torque [Nm]: 380
- ✓ Diameter [mm]: 228
- ✓ Number of teeth: 24
- ✓ Hub profile: 18.3x20.7-24N
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ flywheel kit consisting of lightened flywheel, spring-loaded sinterpad clutch disc and pressure plate in reinforced design
- ✓ for Opel C20XE engines installed in:
- ✓ Astra F Caravan 2.0 i 16V 150HP
- ✓ Astra F CC 2.0 GSI 16V 150PS
- ✓ Vectra A 2000/GT 16V 150HP
- ✓ Vectra A CC 2.0 i 16V 150HP
- ✓ Kadett E CC 2.0 GSI 16V 150HP
- ✓ Kadett E Cabrio 2.0 150PS
- ✓ Calibra 2.0 i 16V 150HP
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ assembly position: rear
- ✓ suitable for Opel Astra F Cabriolet 1.8i 2.0i 1.8i 16V
- ✓ torsion spring clutch disc with organic Performance clutch coating/lining
- ✓ transmittable torque [Nm]: 350
- ✓ diameter [mm]: 228
- ✓ number of teeth: 24
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ 1 set of steering knuckle / wheel bearing housing with wheel hub in 5x112 bolt circle for the VW Golf 1, Caddy, Scirocco, Jetta series
- ✓ Zimmermann brake disc 375x36 Manufacturer's code 400.3684.20 with hub bore 68mm for our brake caliper adapters Article 1199
- ✓ Steering knuckle for the front axle of the VW Golf 1, Jetta 1, Scirocco
- ✓ complete brake system for rear axle: all four-wheel drive Golf 2 3 Syncro VR6
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ centric ring for brake disc on several models BMW
- ✓ internal diameter: 72,50 mm
- ✓ external diameter: 75,00 mm
- ✓ height/thickness: 7,00 mm
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ auxiliary tool for rim assembly of all vehicles with M14x1,5 thread on the wheel hub, for example, VW Golf MK4, MK5, Audi A3 etc.
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ steering angle limiter / turning angle reducer / diameter 28 mm
Adapter with reduction from M12x1,0 on M10x1,0(inner thread)for connection between brake hose and braking force regulator.