Gesucht nach Seat | Toledo III | 2.0 TDi | 5P2

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

Clutch booster kit with new multi-plate discs for all DQ250 (02E) gearboxes, installed in e.g: Golf 5 Eos Beetle Passat Audi A3 TT and many more.

• ✓ optional direct installation

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ drive shaft for VW Golf MK5, MK6, for lowered vehicles

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ bottom length: 30mm
• ✓ top length: 21mm
• ✓ width: 24mm

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ fine thin drive / transmission shaft  VW Golf MK5 Mk6 series, lowered vehicles. 

• ✓ for Audi A3 S3 quattro, VW Golf MK5 3.2 R32 4 motion, etc.
• ✓ wishbone with steering bar/rod and screw set

• ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D

• ✓ Zimmermann Sport brake disc 360x32 Manufacturer's ref.  100.3347.70 / 100.3348.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapters article 940, article 808 and article 830 
• ✓ Audi A4 Avant RS4 quattro

• ✓ eccentric for article 590 galvanized

• ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 7m
• ✓ bottom length: 20mm
• ✓ top length: 23mm
• ✓ width: 18mm

Hexagonal nut M08
Thread right
Galvanized

• ✓ eccentric for article 244, galvanized

• ✓ 2x drive shaft adapters for VW Golf MK1

• ✓ gift voucher 50 Euro

• ✓ spacing plate / bush / bushing for brake caliper adapter

• ✓ universal suitable for all vehicles with track rod ends / heads which have a M16x1,5 internal thread
• ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle

• ✓ hexagon nut: M10
• ✓ thread: right
• ✓ material: stainless steel

• ✓ Gift Voucher 30 Euro

• ✓ Gift Voucher 100 Euro

• ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line

• ✓ Joint set for the 6-speed 02M 02Q transmission
• ✓ Also suitable for our drive shafts for the 02M 02Q transmission

Hexagonal coupling nut M8x30
Thread right
Galvanized

• ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection

• ✓ 1x straight fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ Width: 24mm
• ✓ Height: 47mm

• ✓ assembly position: rear
• ✓ suitable for Audi A6 Avant 3.0 quattro

• ✓ assembly position: rear
• ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI

Hexagonal coupling nut M8x30
Thread right
Galvanized

Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized

Zinc-plated press-in nut M06 with right hand thread

Hexagon thin nut M08
Thread left
Galvanized

• ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material

• ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
• ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
• ✓ original brake calipers with carrier for handbrake from Golf 4 R32
• ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D

• ✓ Zimmermann sports brake disc 350x32 Manufacturer's ref. 400.3649.52 with hub bore turned up to 68mm, suitable for our brake caliper adapters article 928 and article 929
• ✓ Mercedes M-Klasse R-Klasse GL-Klasse VR6 R32 S3

• ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
• ✓ Golf 4 R32

• ✓ Zimmermann brake disc 370x32 Manufacturer's ref.  100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
  
• ✓ Audi TT
• ✓ Seat Leon