Gesucht nach Seat | Cordoba Vario | 1.4i | 6K5
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ 2x 280x22mm G60 brake discs with 5x100 bolt / pitch circle, suitable for alle vehicles that have been converted to G60 brakes
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ wheel hubs for conversion to 5x100mm bolt circle/PCD for the front axle Golf MK2, MK3 / Cabriolet, Variant, Golf MK4 Cabriolet, Passat, Variant, Vento, Caddy 2 box, Corrado, Seat Cordoba / Ibiza 2 / Toledo 2
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 2x 280x22mm G60 brake discs with 5x112 bolt/pitch circle, suitable for all vehicles that have been converted to G60 brakes
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 2x right steering knuckles / axle journals for VW Polo 6N2 Seat Arosa
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Zimmermann Brake Disc 280x22 Manufacturer Number 600.1601.20
- ✓ VW Golf GTI G60 Corrado Seat Cordoba Syncro
Hexagonal nut M08
Thread right
Galvanized
- ✓ Zimmermann Brake Disc 226x10 Manufacturer's ref. 600.3219.52
- ✓ VW Golf II III IV 1.8 GTI 1.9 TDI Corrado Jetta II Passat Seat Ibiza
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 2x drum brake with 5x100 bolt circle suitable for the rear axle of VW Golf 1, 2, Jetta, Audi 80 and many other vehicles
- ✓ OE number: 171501615, 171501615B, 191501615, 191501615B, 171501615A, 823501615B, 171501615C
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ For front axle VW Golf Mk2 Jetta 2, year of construction up to 07/1987
- ✓ spare part for drive shafts for the Golf MK1, MK2 and MK3, Caddy, Jetta 1, Scirooco
- ✓ gaiter / ruber sleeve
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ assembly position: rear
- ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal screw high resistance entirely thread
Type: M10x20
Thread: 1.25
Blank
Quality: 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal screw entirely thread
Type: M08x25
Galvanized
Quality: 8.8
Cylinder head screw with hexagon socket high-strength
Size: M10x95
Quality: 10.9
Hexagonal countersunk socket screw
Type: M10x25
Thread: 1.25
Blank
Class 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x25
Thread 1.5
Blank
Quality 10.9
Hexagonal screw entirely thread
Type: M10x30
Galvanized
Quality: 8.8
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
