Gesucht nach Seat | Exeo | 1.6 | 3R2
- ✓ bushing / bush / sleeve for the wishbone multi-link axle, tension strut, made of high-strength steel for the Audi A4 A6, VW Passat, Skoda Superb series
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 1x clutch disc 228mm suitable for VW Passat 3bg Audi TT A3 A4 B5 B6 A6 4b C5 with 1.8T engines (longitudinally installed)
- ✓ transmittable torque [Nm]: 600
- ✓ diameter [mm]: 228
- ✓ number of teeth: 28
- ✓ hub profile: 20.3x22 x2-28N
- ✓ torsion spring clutch disc with sinterpad clutch coating/lining
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Zimmermann brake disc 288x25 Manufacturer's ref. no.: 100.1216.52
- ✓ Audi A4 1.8 T quattro TDI VW Passat 1.9 TDI V6 Seat Skoda
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ for Audi A4 S4 quattro, Seat Exeo 1.8 T, etc.
- ✓ reinforced control arm / suspension / wishbone Kit, complete with steering bars and track rod ends,
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ assembly position: rear
- ✓ suitable for Audi Seat VW A6 Avant A8 A3 A4 2.7 T quattro 2.8
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ brake line screw adapter, suitable for internal thread M10x1,0 to internal thread M10x1,0
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 57,10 mm
- ✓ external diameter: 65,00 mm
- ✓ steering angle limiter / turning angle reducer / diameter 23 mm
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
Fastening bracket for brake hose. Necessary for the conversion of your rear axle drum brake system
- ✓ brake discs pitch circle diameter / bolt circle / drilling hub bore hole custome-made
- ✓ additional 2nd hole circle / pitch circle drilled in the brake disc
- ✓ turn hub diameter up
- ✓ stylish fan EPYTEC sticker white for e.g. rear window or body
- ✓ size: 155x33mm (width x height)
Adapter with reduction from M12x1,0 on M10x1,0(inner thread)for connection between brake hose and braking force regulator.