Gesucht nach BMW | Z1 Roadster | 2.5 | --
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for all 2.5 and 2.7 M20 engines WITHOUT Motronic / L-Jetronic installed in:
-
- ✓ BMW 5 series 525e ( E28 )
- ✓ BMW 3 series 325i 325iX 325e ( E 30 )
- ✓ BMW 3 series Touring 325i 325iX ( E30 )
- ✓ BMW 3 series convertible 325i ( E30 )
- ✓ BMW 5 series 525i ( E34 )
- ✓ BMW Z1 Roadster 2.5
- ✓ Total weight: 5,0 kg / Savings compared to original: 7,0 kg
- ✓ for all 2.5 and 2.7 M20 engines with Motronic / L-Jetronic installed in the
- ✓ BMW 5 series 525e ( E28 )
- ✓ BMW 3 series 325i 325iX 325e ( E 30 )
- ✓ BMW 3 series Touring 325i 325iX ( E30 )
- ✓ BMW 3 series convertible 325i ( E30 )
- ✓ BMW 5 series 525i ( E34 )
- ✓ BMW Z1 Roadster 2.5
- ✓ Total weight: 4,9 kg / Savings compared to original: 7,1 kg
- ✓ rubber bushes for BMW E36 E46 and Z1 camber adjustable rear axle
- ✓ rubber bushings bushings already pressed in / ready to use
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 1x clutch release lever / fork for BMW series 3 E46 E90
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ drift spacer / steering lock spacer in oder to increase steering angle on models BMW E30 E36 E46 Z1 Z3
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ flywheel kit consisting of lightened flywheel, sprung sinterpad clutch disc and pressure plate in reinforced design
- ✓ suitable for 2.5 and 2.7 M20 engines without Motornic / L-Jetronic
- ✓ BMW 5 series 525e ( E28 )
- ✓ BMW 3 series 325i 325iX 325e ( E 30 )
- ✓ BMW 3 series Touring 325i 325iX ( E30 )
- ✓ BMW 3 series Cabrio 325i ( E30 )
- ✓ BMW 5 series 525i ( E34 )
- ✓ BMW Z1 Roadster 2.5
- ✓ flywheel kit consisting of lightened flywheel, spring-loaded sinterpad clutch disc and pressure plate in reinforced design
- ✓ suitable for all 2.5 and 2.7 M20 engines with Motronic / L-Jetronic from BMW E28 E30, E34
- ✓ flywheel kit consisting of a lightened flywheel, a spring-loaded, organic clutch disc and a reinforced pressure plate
- ✓ suitable for 2.5 and 2.7 M20 engines with Motornic / L-Jetronic
- ✓ Rigid clutch disc with sinter pad clutch lining
- ✓ Transmittable torque [Nm]: not specified by the manufacturer
- ✓ Diameter [mm]: 228
- ✓ Number of teeth: 10
- ✓ Hub profile: 23x29-10N
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ complete brake system for rear axle: all four-wheel drive Golf 2 3 Syncro VR6
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 375x36 Manufacturer's code 400.3684.20 with hub bore 68mm for our brake caliper adapters Article 1199
- ✓ sticker EPYTEC size (335mmx100mm)
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ brake line screw adapter, suitable for internal thread M10x1,0 to internal thread M10x1,0
- ✓ sticker EPYTEC size (335mmx100mm)
- ✓ external diameter: 25mm
- ✓ internal diameter: 12,2mm
- ✓ lenght: 0,75mm
- ✓ material: steel-electrolytically galvanized
- ✓ hub centric ring for Bremsscheibe
- ✓ inner diameter: 64,65 mm
- ✓ outer diameter: 68,00 mm
- ✓ height: 9 mm
Hexagonal screw entirely thread
Type: M06x25
Galvanized
Quality: 8.8
Hexagonal countersunk socket screw
Type: M06x12
Galvanized
Class 8.8