Gesucht nach Skoda | Superb II Kombi | 2.0 TDi 4x4 | 3T5
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for Audi A3 S3 quattro, VW Golf MK5 3.2 R32 4 motion, etc.
- ✓ wishbone with steering bar/rod and screw set
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ 2x tie rods / wishbones for VW Golf Mk5 Mk6 Jetta 3 4 and Audi A1 quattro and many more
- ✓ camber adjustable for the rear axle
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ Zimmermann brake disc 310x22 Manufacturer's ref. 100.3309.52
- ✓ VW Golf MK5 MK6 MK7 Audi A3 TT Seat Leon Skoda Superb 2
- ✓ thinner and 1 cm shorter drive shaft for Audi A3, Sportback, Q3, VW Golf 5, 6, 4-motion, Passat 3c, Skoda Octavia 2, 3 Combi, Superb 2
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ fine thin short drive shaft, right, for VW Golf MK4 R32, Audi TT 8N Quattro. Low-profile vehicle.
- ✓ Zimmermann Sport Brake Disc 345x30 Manufacturer's ref. 100.3301.52
- ✓ Suitable for: Audi A3 S3 2.0 TDI quattro VW Golf 5 6 GTI
- ✓ Joint set for the 6-speed 02M 02Q transmission
- ✓ Also suitable for our drive shafts for the 02M 02Q transmission
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ Bracket Z17 ZR17 ZR18 Z18 6 piston Porsche brake caliper
Fastening bracket for brake hose.
- ✓ external diameter: 25mm
- ✓ internal diameter: 12,2mm
- ✓ lenght: 0,5mm
- ✓ material: steel-electrolytically galvanized
- ✓ external diameter: 25mm
- ✓ internal diameter: 10,2mm
- ✓ length: 1mm
- ✓ material: steel electrolytically galvanized
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal screw entirely thread
Type: M06x10
Galvanized
Quality: 8.8
Hexagonal screw high resistance entirely thread
Type: M08x20
Blank
Quality: 10.9
Hexagonal screw entirely threaded
Type: M10x30
Galvanized
Quality: 10.9