Gesucht nach VW | Polo | 1.0 | 80, 86C
- ✓ large master brake cylinder / main brake cylinder, ideal on all models Golf MK1 Caddy Scirrocco Jetta for a brake conversion to G60 brake. Necessary in order to reach the better volumetric efficiency of the brake and the full brake pressure.
- ✓ large master cylinder / main brake cylinder, ideal on all VW models without ABS for a brake conversion to Porsche brake. Or simply to increase the original brake pressure.
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for all G40 1,3l engines (engine reference: AAU, AAV, NZ, 3F, PY)
- ✓ e.g. VW Polo 86c G40 1,3l
- ✓ total weight: 2,5 kg / saving weight compared to the original:: 2,9 kg
Brake sleeve for rear axle brake system conversion on Golf 2 16V brake disc system.Tailor-made for installation on Polo and Polo G40 86C.
- ✓ for front axle: Golf MK1, Golf MK1 Cabrio, Caddy 14d, Jetta 1, Scirocco 1/2 , Polo 1/2, Passat
- ✓ brake disc: G60 280x22
- ✓ brake caliper: G60 ATE / Girling 54
- ✓ brake caliper mounting bracket: G60 ( important: it must necessarily be the bracket of the 280 brake, and not of the 256. The 256 are too short)
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ reinforced Sachs Motorsport pressure plate for VW Polo 86c G40 VW PY 3F AAU AAV NZ 3F 1,3l 200mm
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ Torsion-sprung clutch disc with sinter pad clutch lining
- ✓ Transmittable torque [Nm]: 250
- ✓ Diameter [mm]: 200
- ✓ Number of teeth: 24
- ✓ Hub profile: 18.3x20.4-24N
- ✓ 2x drum brake with 5x100 bolt circle suitable for the rear axle of VW Golf 1, 2, Jetta, Audi 80 and many other vehicles
- ✓ OE number: 171501615, 171501615B, 191501615, 191501615B, 171501615A, 823501615B, 171501615C
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ Zimmermann brake disc 375x36 Manufacturer's code 400.3684.20 with hub bore 68mm for our brake caliper adapters Article 1199