Gesucht nach Audi | A6 | S6 quattro | 4B2, C5
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
Brake caliper adapter for rear axle brake system to fix brake discs typ S6 4f diameter 330x22mm in combination with Vw/Audi standard brake calipers.
Injection nozzle Adapter. For installation of injection nozzle from RS4 on S4 or S6 2.7 Biturbo.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
Full rear axle adaptation/fixation kit for installation of brake disc from Audi A8 with
disc diameter 310x22mm on your Audi S6 A6 Quattro or Passat W8……
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ Zimmermann brake disc 356x22 Manufacturer's ref.: 100.3362.20
- ✓ Audi A6 A7 Sportback A8 S8 3.0 TDI TFSI quattro
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ rear axle, wheel offset plates on low profile vehicles
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ assembly position: rear
- ✓ suitable for Audi A6 Avant 3.0 quattro
- ✓ Zimmermann Brake Disc 269x22 Manufacturer's ref. 100.3337.20
- ✓ Audi A6, A6 Avant, VW Passat, Variant
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal screw with flange partial thread high resistance
Type: M10x25
Galvanized
Quality: 10.9
Hexagonal countersunk socket screw high resistance
Type: M10x25
Blank
Class 10.9
Cylinder head screw with hexagon socket high-strength
Size: M10x95
Quality: 10.9
- ✓ hub centric ring for Bremsscheibe
- ✓ inner diameter: 64,65 mm
- ✓ outer diameter: 68,00 mm
- ✓ height: 9 mm
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal countersunk socket screw
Type: M10x25
Thread: 1.25
Blank
Class 10.9
Hexagonal socket head cap screw high resistance with partial thread
Type: M12x70
Thread 1.5
Blank
Quality 10.9
- ✓ cylinder-head bolts with hexagon socket, flat head, high-strength
- ✓ dimension: M10x30
- ✓ alloy blank
- ✓ quality 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength