Gesucht nach Seat | Ibiza III | 1.8 T Cupra R | 6L1
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ 1x clutch disc 240mm suitable for VW Golf MK4 1.8T GTI Bora V5 V6 Passat Audi A3 A4 A6 TT Seat Leon Ibizia
- ✓ transmittable torque [Nm]: 600
- ✓ diameter [mm]: 240
- ✓ number of teeth: 23
- ✓ hub profile: 21,8x24 2-23N
- ✓ torsion spring clutch disc with sinterpad clutch coating/lining
- ✓ lightened flywheel for VW Golf MK4 Bora Audi A3 S3 TT Seat Leon & Ibiza. Models with 1,8 T 20 V turbo engine and 240 mm clutch
- ✓ total weight: 5,0 kg / saving weight compared to the original: 7,0 kg
- ✓ wheel offset plates for rear axle
- ✓ track extension by 10 mm per side
- ✓ for VW Polo 6R Polo 9n Audi A1 Seat Ibiza IV V
- ✓ Kit of camber correction / adjustment plates for rear axle
- ✓ suitable for : Fiat Ibiza 6L, VW Polo 9N, Audi A1
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for rear axle: Seat Ibiza 6l, VW Polo 9N
- ✓ brake caliper: VW , reference left 8N0615423C + right 8N0615424C
- ✓ brake caliper support / bracket , reference 8N0615425B
- ✓ brake disc: VW Golf MK4 (front axle) 280x22mm VAG reference 1J0615301E
- ✓ camber and track correction / adjustement plates for installation on rear axle. Thanks to this plate you can modify the camber of the rear wheel, negative or positive.
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ reinforced Sachs Motorsport pressure plate for: VW Golf MK4 1.8T GTI Bora V5 V6 Passat Audi A3 A4 A6 TT Seat Leon Ibizia 240mm
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ for rear axle VW Polo 9N
- ✓ brake caliper: Audi S3 8L oder VW Golf R32
- ✓ brake disc: VW Phaeton 335x22mm , reference 4E0615601L
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ Zimmermann Brake Disc 312x25 Manufacturer Number 100.1240.52
- ✓ VW Golf Bora Audi TT A3 GTI S3 V6 Seat Skoda Ibiza
- ✓ Zimmermann Brake Disc 288x25 Manufacturer Number 100.1235.52
- ✓ VW Golf 4 Polo Bora Audi A1 Seat Leon Skoda Octavia 1
- ✓ assembly position: rear
- ✓ suitable for Audi Seat VW A6 Avant A8 A3 A4 2.7 T quattro 2.8
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ spare bolts for cardan shaft flange
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ external diameter: 22mm
- ✓ internal diameter: 11mm
- ✓ length: 57mm
- ✓ material: steel
- ✓ auxiliary tool for rim assembly of all vehicles with M14x1,5 thread on the wheel hub, for example, VW Golf MK4, MK5, Audi A3 etc.
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
Hexagonal countersunk socket screw high resistance
Type: M10x25
Blank
Class 10.9