Gesucht nach VW | Polo | 1.9 TDI | 9N
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ wheel offset plates for rear axle
- ✓ track extension by 10 mm per side
- ✓ for VW Polo 6R Polo 9n Audi A1 Seat Ibiza IV V
- ✓ Kit of camber correction / adjustment plates for rear axle
- ✓ suitable for : Fiat Ibiza 6L, VW Polo 9N, Audi A1
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for rear axle: Seat Ibiza 6l, VW Polo 9N
- ✓ brake caliper: VW , reference left 8N0615423C + right 8N0615424C
- ✓ brake caliper support / bracket , reference 8N0615425B
- ✓ brake disc: VW Golf MK4 (front axle) 280x22mm VAG reference 1J0615301E
- ✓ camber and track correction / adjustement plates for installation on rear axle. Thanks to this plate you can modify the camber of the rear wheel, negative or positive.
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ these spacers are used to install discs that are too large in size or diameter and thus touch the wheel axle.
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ for rear axle VW Polo 9N
- ✓ brake caliper: Audi S3 8L oder VW Golf R32
- ✓ brake disc: VW Phaeton 335x22mm , reference 4E0615601L
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ high-strength aluminum spacer plates in 9mm thickness with bolt circle / pitch circle 5x100 and 5x112 for Golf Mk4 Polo 6R and much more
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ Zimmermann Brake Disc 312x25 Manufacturer Number 100.1240.52
- ✓ VW Golf Bora Audi TT A3 GTI S3 V6 Seat Skoda Ibiza
- ✓ Zimmermann Brake Disc 288x25 Manufacturer Number 100.1235.52
- ✓ VW Golf 4 Polo Bora Audi A1 Seat Leon Skoda Octavia 1
- ✓ assembly position: rear
- ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI
- ✓ cylinder-head bolts with hexagon socket, flat head, high-strength
- ✓ dimension: M10x30
- ✓ alloy blank
- ✓ quality 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal screw high resistance with partial thread
Type: M12x100
Blank
Quality: 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength