Gesucht nach VW | Passat Variant | 1.9 TDI | 35I, 3A5
- ✓ for all G60 GTI 16V / TDI engines
- ✓ e.g 1,8T Golf 4, Audi A3 with 5 speed gearbox
- ✓ total weight: 4,1 kg / saving weight compared to the original: 4,9 kg
- ✓ reinforced clutch release lever for all 02A and 02J 5 speed gear
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for front axle: Audi A4, A6, VW Passat YoC 1996-2005
- ✓ brake caliper: Porsche Cayenne oder VW Tuareg ( 18 inch version ), reference 95535142153 / 95535142253
- ✓ brake disc: Mercedes CLA 43 AMG 350x32mm, reference: A1764210212
The steel sheets need to be welded directly on the clutch release lever to avoid folding after installation of more resistant clutch or pressure plate.
- ✓ for front axle: Audi A4, A6, VW Passat YoC 1996-2005
- ✓ brake caliper: Porsche Cayenne orr VW Tuareg ( 17 inchl version) , reference 7L6 615 123 T and 7L6 615 124 T
- ✓ brake disc: Mercedes CLK 330x32mm , reference 210 421 2612
- ✓ injection rail for conversion from 16V to G60 and turbo. Required for engine conversions with PL, KR, 9A and ABF to G60 and turbo engine block, combined with the standard intake manifold
- ✓ flywheel kit consisting of lightened flywheel, sprung sinterpad clutch disc and pressure plate in reinforced design suitable for VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02JJ
- ✓ wheel hubs for conversion to 5x100mm bolt circle/PCD for the front axle Golf MK2, MK3 / Cabriolet, Variant, Golf MK4 Cabriolet, Passat, Variant, Vento, Caddy 2 box, Corrado, Seat Cordoba / Ibiza 2 / Toledo 2
- ✓ VW Golf 2 3 Corrado G60 wishbone reinforcing plate 16V 1,8T 2,0 GTI
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Aluminum racing engine bracket for all types of engines and vehicles G60
- ✓ reinforced Sachs Motorsport pressure plate for VW Golf Corrado Passat G60 GTI 16V engines
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ kit for brake / bolt circle/ pitch circle diameter conversion, front and rear axle
- ✓ wheel hub: 5x112
- ✓ VW Golf MK3, Passat
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ flywheel kit, VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02J, consisting of lightened flywheel, spring-loaded, organic clutch disc and pressure plate in reinforced design
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ wheel hub conversion for 5x112 pitsch circle diameter (PCD) on front axle for VW Golf MK2 MK3, Passat Corrado with VR6 axle
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ torsion spring clutch disc with organic performance clutch coating/lining
- ✓ transmittable torque [Nm]: 520
- ✓ diameter [mm]: 228
- ✓ number of teeth: 10
- ✓ hub profile: 23x29-10N
Hexagonal nut M08
Thread right
Galvanized
- ✓ for front axle: Audi A4 A6, VW Passat 3B2 3B3
- ✓ brake caliper: 8-piston Audi RS4 B7 , reference 8E0615107 / 8E0615108
- ✓ brake disc: Audi RS4 B7 365x34mm , reference: 8E0615301AB
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ complete brake system for front axle: Audi A4 B5 VW Passat
- ✓ brake caliper: Porsche Cayenne ZR18 / ZL18 part no. 95535142153 / 95535142253
- ✓ Brake disc: Mercedes CLA 43 AMG 350x32mm part number: A1764210212
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ complete brake system for front axle: VW Passat, Audi A4 B5, Audi A6 4B
- ✓ brake calliper: Porsche Cayenne ZL17 / ZR17 part no. 7L6 615 123 T + 7L6 615 124 T
- ✓ Brake disc Mercedes CLK 330x32mm Part No.: 210 421 2612
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ Zimmermann sports brake disc 280x22 Manufacturer's ref. 600.1606.52
- ✓ VW Golf VR6 GTI Corrado Seat Toledo
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D