Gesucht nach BMW | 3er | 316i | E36

• ✓ steering angle limiter / turning angle reducer suitable for all BMW E30 and E36

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ for all BMW M40 and M42 engines
• ✓ e.g BMW E30, E34, E36 without air con
• ✓ total weight: 4,8 kg / saving weight compared to the original: 7,2 kg

• ✓ repair plate kit for rear axle on model 3th BMW E36

• ✓ for BMW E36 and E46
• ✓ for conversion to  turbocharger

• ✓ rear axle adjustment to be able to fix the toe-in perfectly on all BMW E36 E46 and Z4

• ✓ repair / reinforcing plate kit for the control / trailing arm (rear axle), on model 3th BMW E36

• ✓ clutch pin / clutch locking pin made of brass for all common BMW models such as e.g. E30 E46 E81 E88 and much more

• ✓ for front axle: BMW E36
• ✓ brake caliper: BMW Performance 6 piston,  reference left 34116786741 + right 34116786742
• ✓ brake disc: BMW E46 M3 Z3 CSL (VA) 345x28mm

• ✓ for BMW E30, E36, or Z3
• ✓ engine: M30 / M5 (S38) from BMW E32 and E34 (3,0 and 3,5l from 5er and 7er)

• ✓ for front axle: BMW E36
• ✓ brake caliper: Porsche Boxter S, reference left 996.351.425 + right 996.351.426
• ✓ brake disc: BMW E46 M3 CSL 345x28 mm

• ✓ flywheel kit consisting of lightened flywheel, spring sinterpad clutch disc and pressure plate with reinforced design
• ✓ suitable for:
  • ✓ E30
  • ✓ E34
  • ✓ E36

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ rubber bushes for BMW E36 E46 and Z1 camber adjustable rear axle
• ✓ rubber bushings bushings already pressed in / ready to use

• ✓ reinforced Sachs Motorsport pressure plate for BMW E30 E36 M40 M42 engine 215mm
• ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ bottom length: 30mm
• ✓ top length: 21mm
• ✓ width: 24mm

• ✓ 1x clutch disc 210mm suitable for BMW E30 E34 E36 M40 M42 engines without air conditioning
• ✓ transmittable torque [Nm]: 600
• ✓ diameter [mm]: 210
• ✓ number of teeth: 10
• ✓ hub profile: 23x29-10N
• ✓ torsion spring clutch disc with sinterpad clutch coating/lining

• ✓ 1x clutch release lever / fork for BMW series 3 E46 E90

• ✓ adjustable Uniball wishbone bearing for 3. BMW E30 E36 and M3 models, front axle

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ for e.g. VW BMW E36 E30 Z3 etc.
• ✓ Connection 1 M10x1 external thread 45° bent
• ✓ Connection 2 M10x1 female thread straight
• ✓ Length 60cm long / Transparent sheathed Syncro

• ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D

• ✓ Zimmermann Sport brake disc 360x32 Manufacturer's ref.  100.3347.70 / 100.3348.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapters article 940, article 808 and article 830 
• ✓ Audi A4 Avant RS4 quattro

• ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 7m
• ✓ bottom length: 20mm
• ✓ top length: 23mm
• ✓ width: 18mm

• ✓ 2x wheel bearing sets rear axle suitable for many 3-series BMW E30 E36 E46 models

• ✓ eccentric for article 590 galvanized

Hexagonal nut M08
Thread right
Galvanized

• ✓ eccentric for article 244, galvanized

• ✓ 2x drive shaft adapters for VW Golf MK1

• ✓ gift voucher 50 Euro

• ✓ for front axle: BMW E36, Z3
• ✓ brake caliper: BMW E38 Brembo 4-piston, reference Left 34 11 1 163 757 right 34 11 1 163 758
• ✓ brake pads: BMW E38 Brembo 4-piston, reference 34 11 6 761 254
• ✓ brake disc: BMW E46 M3 325x28 mm, reference left 34 11 2 282 801 right 34 11 2 282 802

• ✓ drift spacer / steering lock spacer in oder to increase steering angle on models BMW E30 E36 E46 Z1 Z3

• ✓ spacing plate / bush / bushing for brake caliper adapter

• ✓ hexagon nut: M10
• ✓ thread: right
• ✓ material: stainless steel

• ✓ Gift Voucher 30 Euro

• ✓ Gift Voucher 100 Euro

• ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line

• ✓ 1x straight fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ Width: 24mm
• ✓ Height: 47mm

Hexagonal coupling nut M8x30
Thread right
Galvanized

Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized