Gesucht nach BMW | 3er | 328i | E36
- ✓ steering angle limiter / turning angle reducer suitable for all BMW E30 and E36
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ repair plate kit for rear axle on model 3th BMW E36
- ✓ for BMW E36 and E46
- ✓ for conversion to turbocharger
- ✓ rear axle adjustment to be able to fix the toe-in perfectly on all BMW E36 E46 and Z4
- ✓ repair / reinforcing plate kit for the control / trailing arm (rear axle), on model 3th BMW E36
- ✓ for front axle: BMW E36
- ✓ brake caliper: BMW Performance 6 piston, reference left 34116786741 + right 34116786742
- ✓ brake disc: BMW E46 M3 Z3 CSL (VA) 345x28mm
- ✓ for BMW E30, E36, or Z3
- ✓ engine: M30 / M5 (S38) from BMW E32 and E34 (3,0 and 3,5l from 5er and 7er)
- ✓ for front axle: BMW E36
- ✓ brake caliper: Porsche Boxter S, reference left 996.351.425 + right 996.351.426
- ✓ brake disc: BMW E46 M3 CSL 345x28 mm
- ✓ rubber bushes for BMW E36 E46 and Z1 camber adjustable rear axle
- ✓ rubber bushings bushings already pressed in / ready to use
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ adjustable Uniball wishbone bearing for 3. BMW E30 E36 and M3 models, front axle
- ✓ 1x clutch release lever / fork for BMW series 3 E46 E90
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for e.g. VW BMW E36 E30 Z3 etc.
- ✓ Connection 1 M10x1 external thread 45° bent
- ✓ Connection 2 M10x1 female thread straight
- ✓ Length 60cm long / Transparent sheathed Syncro
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ drift spacer / steering lock spacer in oder to increase steering angle on models BMW E30 E36 E46 Z1 Z3
- ✓ for front axle: BMW E36, Z3
- ✓ brake caliper: BMW E38 Brembo 4-piston, reference Left 34 11 1 163 757 right 34 11 1 163 758
- ✓ brake pads: BMW E38 Brembo 4-piston, reference 34 11 6 761 254
- ✓ brake disc: BMW E46 M3 325x28 mm, reference left 34 11 2 282 801 right 34 11 2 282 802
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ hub centric ring for Bremsscheibe
- ✓ inner diameter: 64,65 mm
- ✓ outer diameter: 68,00 mm
- ✓ height: 9 mm
- ✓ external diameter: 25mm
- ✓ internal diameter: 10,2mm
- ✓ length: 2mm
- ✓ material: steel electrolytically galvanized
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal screw with flange partial thread
Type: M06x20
Galvanized
Class: 8.8
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal screw high resistance entirely thread
Type: M08x20
Blank
Quality: 10.9
- ✓ external diameter: 25mm
- ✓ internal diameter: 12,2mm
- ✓ lenght: 0,75mm
- ✓ material: steel-electrolytically galvanized
Hexagonal screw entirely thread
Type: M06x25
Galvanized
Quality: 8.8
