Gesucht nach VW | Polo | 50 1.0 | 6N1

• ✓ large master brake cylinder / main brake cylinder, ideal on all models Golf MK1 Caddy Scirrocco Jetta for a brake conversion to G60 brake. Necessary in order to reach the better volumetric efficiency of the brake and the full brake pressure.

• ✓ large master cylinder / main brake cylinder, ideal on all VW models without ABS for a brake conversion to Porsche brake. Or simply to increase the original brake pressure.

Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ 1x engine mounting bracket for 1,8 2,0l from Audi A3 Golf 4 engine
• ✓ 1x kit 02A / 02J 5-speed gearbox mounting bracket for VW Polo 6N Lupo
• ✓ 1x pendulum support adapter

• ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
• ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle

• ✓ axle journal VW Polo 6N2 GTI

Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.

• ✓ engine mounting bracket for 1,8 2,0l engine from Audi A3 Golf MK4
• ✓ 1x kit 02M 6-speed gearbox mounting bracket for VW Polo 6n Lupo
• ✓ 1x pendulum support adapter

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ bottom length: 30mm
• ✓ top length: 21mm
• ✓ width: 24mm

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ 2x right steering knuckles / axle journals for VW Polo 6N2 Seat Arosa

• ✓ VW Polo Lupo gearbox mounting bracket for 02M 6-speed gearbox

• ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D

• ✓ Zimmermann Sport brake disc 360x32 Manufacturer's ref.  100.3347.70 / 100.3348.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapters article 940, article 808 and article 830 
• ✓ Audi A4 Avant RS4 quattro

• ✓ eccentric for article 590 galvanized

• ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 7m
• ✓ bottom length: 20mm
• ✓ top length: 23mm
• ✓ width: 18mm

Hexagonal nut M08
Thread right
Galvanized

• ✓ eccentric for article 244, galvanized

• ✓ 2x drive shaft adapters for VW Golf MK1

• ✓ gift voucher 50 Euro

• ✓ spacing plate / bush / bushing for brake caliper adapter

• ✓ thin fine drive shaft for VW Golf MK1 Cabriolet, MK2, Polo and Lupo for lowered vehicles

• ✓ hexagon nut: M10
• ✓ thread: right
• ✓ material: stainless steel

• ✓ Gift Voucher 30 Euro

• ✓ Gift Voucher 100 Euro

• ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line

• ✓ 2x drum brake with 5x100 bolt circle suitable for the rear axle of VW Golf 1, 2, Jetta, Audi 80 and many other vehicles
• ✓ OE number: 171501615, 171501615B, 191501615, 191501615B, 171501615A, 823501615B, 171501615C

Hexagonal coupling nut M8x30
Thread right
Galvanized

• ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection

• ✓ spare part for drive shafts for the Golf MK1, MK2 and MK3, Caddy, Jetta 1, Scirooco
• ✓ gaiter / ruber sleeve

• ✓ 1x straight fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ Width: 24mm
• ✓ Height: 47mm

• ✓ assembly position: rear
• ✓ suitable for Audi A6 Avant 3.0 quattro

• ✓ assembly position: rear
• ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI

Hexagonal coupling nut M8x30
Thread right
Galvanized

Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized

Zinc-plated press-in nut M06 with right hand thread

Hexagon thin nut M08
Thread left
Galvanized

• ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material