Gesucht nach Audi | A4 | 1.8 T quattro | 8E2, B6
- ✓ bushing / bush / sleeve for the wishbone multi-link axle, tension strut, made of high-strength steel for the Audi A4 A6, VW Passat, Skoda Superb series
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ wheel hubs for conversion to 5x112 bolt / pitch circle for the rear axle
- ✓ suitable for Audi A4 B5 Quattro
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 1x clutch disc 228mm suitable for VW Passat 3bg Audi TT A3 A4 B5 B6 A6 4b C5 with 1.8T engines (longitudinally installed)
- ✓ transmittable torque [Nm]: 600
- ✓ diameter [mm]: 228
- ✓ number of teeth: 28
- ✓ hub profile: 20.3x22 x2-28N
- ✓ torsion spring clutch disc with sinterpad clutch coating/lining
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ Zimmermann brake disc 288x25 Manufacturer's ref. no.: 100.1216.52
- ✓ Audi A4 1.8 T quattro TDI VW Passat 1.9 TDI V6 Seat Skoda
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ reinforced Sachs Motorsport pressure plate for VW Passat 3bg Audi A4 B5 B6 B7 A6 4b C5 1,8T 20V 2,0 FSI
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ for all 1.8T engines with 228 mm clutches
- ✓ e.g. VW Passat 3bg 1.8T, Audi A4 B5 B6 1.8T, Audi A6 4B C5
- ✓ total weight: 8.0 kg / saving weight compared to the original: 4.0 kg
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ Zimmermann Disque de frein 312x25 Numéro de fabrication : 100.1242.20
- ✓ Audi A4 1.8 T quattro 2.5 TDI Seat
- ✓ Zimmermann brake disc 312x25 manufacturer's ref. no.: 100.1242.52
- ✓ Audi A4 1.8 T quattro 2.5 TDI Seat
- ✓ assembly position: rear
- ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized