Gesucht nach BMW | 3er | 318d | E46
Complete kit of repair plates for the support of the rear axle on the body of BMW E46 revealing cracks.
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ rear axle adjustment to be able to fix the toe-in perfectly on all BMW E36 E46 and Z4
- ✓ for front axle: BMW E46 / E85 / Z4
- ✓ brake caliper: for 135i reference 34 11 6 786 741
- ✓ brake disc: for BMW E45 M3 reference 3411 2 282 445
- ✓ clutch pin / clutch locking pin made of brass for all common BMW models such as e.g. E30 E46 E81 E88 and much more
- ✓ reinforcing / repair plates for chassis and axle support / beam on all models BMW E46
- ✓ rubber bushes for BMW E36 E46 and Z1 camber adjustable rear axle
- ✓ rubber bushings bushings already pressed in / ready to use
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 1x clutch release lever / fork for BMW series 3 E46 E90
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ reinforced aluminium axle bearing for the rear axle on models BMW E46 and Z4 E85 E86
- ✓ for e.g. VW BMW E36 E30 Z3 etc.
- ✓ Connection 1 M10x1 external thread 45° bent
- ✓ Connection 2 M10x1 female thread straight
- ✓ Length 60cm long / Transparent sheathed Syncro
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ for rear axle: BMW E46
- ✓ brake disc: rear BMW E46 M3, 328x20mm, reference 34212282303 oder 34212282304
- ✓ brake caliper: Porsche 986, reference 986.352.421 / 986.352.422, or reference 996.352.421 / 996.352.422
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ drift spacer / steering lock spacer in oder to increase steering angle on models BMW E30 E36 E46 Z1 Z3
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ 4-piece PU bushing kit for the front axle housing bearing on the rear axle of the BMW E46
- ✓ BMW 33316770784, BMW 33311092516, BMW 33316757394
- ✓ 4-piece PU bushing kit for the rear axle housing bearing on the rear axle of the BMW E46
- ✓ BMW 33 31 6 770 783, BMW 33 31 1 092 515, BMW 33 31 6 757 393
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ Installation location: front
- ✓ BMW 3 Series Convertible, Compact, Coupe, Touring
- ✓ Installation location: front
- ✓ BMW 3 Series, Compact, Coupe, Cabrio
- ✓ 2-part steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ continuous steering angle limiter / turning angle reducer made of stainless steel, suitable for all vehicles
- ✓ thickness 8mm diameter 22mm
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles