Gesucht nach Audi | A6 | S6 4.2 quattro | 4A2, C4
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ intermediate piece / connection piece for Audi A6 C4 made of stainless steel, OE number: 4A0611789C
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
Lane enlargement of 3mm on each wheel and 6mm on each axle. Tailor-made for all vehicles with 5x112mm bolt circle.
- ✓ for rear axle: Audi A6 C4, S4 C4
- ✓ brake caliper: Audi A6 C4 Girling 43 , reference 447 615 423 + 447615424
- ✓ brake mounting bracket: Audi A6 C5 , reference 4D0615425B
- ✓ brake caliper: A8 4E8 310x22 mm reference Audi 3D0 615 601 D
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ eccentric for article 244, galvanized
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ für Vorderachse: Audi S4 C6, A4 C6
- ✓ Bremssattel: TTRS Teile Nr. li 8J0 615 107 + re 8J0 615 108
- ✓ Bremsbeläge: Teile Nr: 8J0 698 151 E
- ✓ Bremsscheibe: TTRS 370x32mm Teile Nr. 8J0615301F
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ Zimmermann brake disc 375x36 Manufacturer's code 400.3684.20 with hub bore 68mm for our brake caliper adapters Article 1199
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ 1 set of steering knuckle / wheel bearing housing with wheel hub in 5x112 bolt circle for the VW Golf 1, Caddy, Scirocco, Jetta series
- ✓ complete brake system for rear axle: all four-wheel drive Golf 2 3 Syncro VR6
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Brembo brake disc two-piece 370x30mm Manufacturer number: 09.D482.33
- ✓ Audi A6 C8 A7
- ✓ Steering knuckle for the front axle of the VW Golf 1, Jetta 1, Scirocco