Gesucht nach VW | Golf III Variant | 2.9 VR6 Syncro | 1H5
- ✓ for VW Golf MK 4 Audi A3 Polo, etc
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ lenght: 57cm / transparent covered
- ✓ large master brake cylinder / main brake cylinder, ideal on all models Golf MK1 Caddy Scirrocco Jetta for a brake conversion to G60 brake. Necessary in order to reach the better volumetric efficiency of the brake and the full brake pressure.
- ✓ 1.for front axle: Golf 4 Jubi, Golf 4 V6, Audi S3, Audi TT 225 PS
- ✓ 1.brake disc: 312x25
- ✓ 2.for front axle: Golf 4R32, Audi S3, Audi TT
- ✓ 2.brake disc: 334x32
- ✓ large master cylinder / main brake cylinder, ideal on all VW models without ABS for a brake conversion to Porsche brake. Or simply to increase the original brake pressure.
Brake caliper adapter for front axle brake disc system to fix Porsche /Brembo ZR17 6 piston brake calipers with R32 brake disc,diameter 334 x 32mm.
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ conversion kit to hydraulic clutch Golf Mk4
- ✓ suitable for VW Golf Mk3, Vento, Golf Mk4 Cabrio
- ✓ for all VW VR6 engines with 2,8 and 2,9 AAA and ABV
- ✓ e.g. VW Passat VR6 2,9l ABV
- ✓ total weight: 4,1 kg / saving weight compared to the original: 6.8 kg
- ✓ for front axle: Golf MK3, Passat 35i VR6,Corrado VR6
- ✓ brake caliper: Porsche Cayenne (rear axle) reference 955.352.421 + 955.352.422 Brembo reference : left 20.7673.03 + right 20.7673.04
- ✓ brake disc: Seat Leon Cupra R 323x28 reference : 1ML 615 301
- ✓ for e.g VW T5 T6 bus / transporter
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 60cm / transparent covered
- ✓ drive shaft kit for all VW Golf MK2 MK3, Passat, Corrado with VR6 axle, stable up to 800 HP
- ✓ for front axle: Golf MK4 25 years Jubi GTI / V5, Golf MK4 V6, Audi S3 8L,TT
- ✓ brake caliper: S3 /R32 reference : left 1J0615125B , right 1J0615126
- ✓ brake disc: S3 R32 312x25mm reference : left 1J0615301AA , right 1J0615302A
- ✓ brake pad: S3 /R32 reference : 8D0698151D
- ✓ 1x 3mm reinforcing steel plate for underide protection, for VR6 oil sump/ pan, suitable for all vehicles with VR6 engine, for example Golf MK1 MK2 MK3 Corrado Vento, etc.
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ connection reducer to radiator water inlet. Is required on Golf MK1 for conversin to VR6 / R32 engine
- ✓ reinforcing plate for all VW VR6 R32 und VR6 turbo / chager engines
- ✓ for fraont axle: Golf VR6,Corrado VR6,Passat 35i
- ✓ brake caliper: ZR18 Porsche Porsche Cayenne or VW Tuareg , reference 955.351.421.50 + 955.351.422.50
- ✓ brake disc: Golf MK4 R32 334x32 mm , reference 1J0 615 301A +1J0 615 302 A
- ✓ Aluminium bushing for Golf VR6 02a G60 cable gearstick
- ✓ 1x assembly adapter for the VR6 engine
- ✓ complete brake system for front axle: VW Golf 3, VW Passat, VW Corrado, Seat Toledo
- ✓ brake calliper: Porsche Cayenne ZL17 / ZR17 part no. 7L6 615 123 T + 7L6 615 124 T
- ✓ Brake disc: Golf 4 R32 334x32mm Part No. 1J0 615 301AA + 1J0 615 302 A
- ✓ drive shaft kit for all VW Golf MK2 MK3, Passat, Corrado with VR6 axle, stable up to 800 HP.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for e.g VW T5 T6 bus / transporter
- ✓ connection 1 M10x1 external thread straight
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 60cm / transparent covered
- ✓ for front axle: Golf VR6, Corrado VR6, Passat 35i VR6
- ✓ brake caliper: Porsche 996 (HA) reference :996.352.422 + 996.352.421
- ✓ brake disc: Audi S3 (8L) /Golf 4 GTI 312x25mm reference : 8N0 615 301 A
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Reinforzed motor cradle for engine exchange.For installation of engine typ VW VR6 on Passat Golf Corrado Vento
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ complete brake system for front axle: Golf VR6,Corrado VR6,Passat 35i
- ✓ brake calliper: Porsche Cayenne ZR18 / ZL18 part no. 955.351.421.50 + 955.351.422.50
- ✓ Brake disc: Golf 4 R32 334x32 mm Part No. 1J0 615 301A +1J0 615 302 A
Brake caliper adapter for front axle brake system to fix brake discs typ Cupra R diameter 323x28mm in combination with Porsche 996 Brembo brake calipers on VW vehicles.
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ for front axle: VW Golf Mk3 VR6, Passat VR6, Corrado VR6, Seat Toledo
- ✓ brake caliper: Porsche 996, reference 996.351.422 + 996.351.421 (only 100% suitable with the specified Porsche calipers)
- ✓ brake disc: Audi S3 (8L) /Golf Mk4 GTI 312x25 mm, reference 8N0 615 301 A
- ✓ wheel hub conversion for 5x112 pitsch circle diameter (PCD) on front axle for VW Golf MK2 MK3, Passat Corrado with VR6 axle
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ Drive shaft set for all VW Golf 2 3, Passat, Corrado with VR6 plus axle, stable up to 1000 hp
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1