Gesucht nach VW | Vento | 2.8 VR6 | 1H2
- ✓ for VW Golf MK 4 Audi A3 Polo, etc
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ lenght: 57cm / transparent covered
- ✓ 1.for front axle: Golf 4 Jubi, Golf 4 V6, Audi S3, Audi TT 225 PS
- ✓ 1.brake disc: 312x25
- ✓ 2.for front axle: Golf 4R32, Audi S3, Audi TT
- ✓ 2.brake disc: 334x32
Brake caliper adapter for front axle brake disc system to fix Porsche /Brembo ZR17 6 piston brake calipers with R32 brake disc,diameter 334 x 32mm.
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
- ✓ conversion kit to hydraulic clutch Golf Mk4
- ✓ suitable for VW Golf Mk3, Vento, Golf Mk4 Cabrio
- ✓ for all VW VR6 engines with 2,8 and 2,9 AAA and ABV
- ✓ e.g. VW Passat VR6 2,9l ABV
- ✓ total weight: 4,1 kg / saving weight compared to the original: 6.8 kg
- ✓ for front axle: Golf MK3, Passat 35i VR6,Corrado VR6
- ✓ brake caliper: Porsche Cayenne (rear axle) reference 955.352.421 + 955.352.422 Brembo reference : left 20.7673.03 + right 20.7673.04
- ✓ brake disc: Seat Leon Cupra R 323x28 reference : 1ML 615 301
- ✓ for e.g VW T5 T6 bus / transporter
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 60cm / transparent covered
- ✓ drive shaft kit for all VW Golf MK2 MK3, Passat, Corrado with VR6 axle, stable up to 800 HP
- ✓ for front axle: Golf MK4 25 years Jubi GTI / V5, Golf MK4 V6, Audi S3 8L,TT
- ✓ brake caliper: S3 /R32 reference : left 1J0615125B , right 1J0615126
- ✓ brake disc: S3 R32 312x25mm reference : left 1J0615301AA , right 1J0615302A
- ✓ brake pad: S3 /R32 reference : 8D0698151D
- ✓ 1x 3mm reinforcing steel plate for underide protection, for VR6 oil sump/ pan, suitable for all vehicles with VR6 engine, for example Golf MK1 MK2 MK3 Corrado Vento, etc.
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ 1x reinforced engine mount set for VW Golf 3 Vento VR6 16V GTI
- ✓ shore hardness 68
- ✓ connection reducer to radiator water inlet. Is required on Golf MK1 for conversin to VR6 / R32 engine
- ✓ reinforcing plate for all VW VR6 R32 und VR6 turbo / chager engines
- ✓ for fraont axle: Golf VR6,Corrado VR6,Passat 35i
- ✓ brake caliper: ZR18 Porsche Porsche Cayenne or VW Tuareg , reference 955.351.421.50 + 955.351.422.50
- ✓ brake disc: Golf MK4 R32 334x32 mm , reference 1J0 615 301A +1J0 615 302 A
- ✓ accelerator pedal adapter for conversion from the original Golf MK3 pedals to Golf MK7 gas pedals
- ✓ Aluminium bushing for Golf VR6 02a G60 cable gearstick
- ✓ 1x assembly adapter for the VR6 engine
- ✓ clutch master cylinder for VW Golf MK3, Golf MK4 Cabrio Polo Caddy, etc.
- ✓ manufacturer number: 1H1721401, 1H1721401B, 1H1721401A
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ complete brake system for front axle: VW Golf 3, VW Passat, VW Corrado, Seat Toledo
- ✓ brake calliper: Porsche Cayenne ZL17 / ZR17 part no. 7L6 615 123 T + 7L6 615 124 T
- ✓ Brake disc: Golf 4 R32 334x32mm Part No. 1J0 615 301AA + 1J0 615 302 A
- ✓ 1x steel strut bar / brace for rear axle on models VW Vento, Jetta 2, Golf MK2, Golf MK3 and Corrado
- ✓ drive shaft kit for all VW Golf MK2 MK3, Passat, Corrado with VR6 axle, stable up to 800 HP.
- ✓ for front axle VW Golf MK3 Vento Toledo VR6 16V
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for e.g VW T5 T6 bus / transporter
- ✓ connection 1 M10x1 external thread straight
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 60cm / transparent covered
- ✓ for front axle: Golf VR6, Corrado VR6, Passat 35i VR6
- ✓ brake caliper: Porsche 996 (HA) reference :996.352.422 + 996.352.421
- ✓ brake disc: Audi S3 (8L) /Golf 4 GTI 312x25mm reference : 8N0 615 301 A
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
Reinforzed motor cradle for engine exchange.For installation of engine typ VW VR6 on Passat Golf Corrado Vento
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ complete brake system for front axle: Golf VR6,Corrado VR6,Passat 35i
- ✓ brake calliper: Porsche Cayenne ZR18 / ZL18 part no. 955.351.421.50 + 955.351.422.50
- ✓ Brake disc: Golf 4 R32 334x32 mm Part No. 1J0 615 301A +1J0 615 302 A
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ kit for brake / bolt circle/ pitch circle diameter conversion, front and rear axle
- ✓ wheel hub: 5x112
- ✓ VW Golf MK3, Passat
Brake caliper adapter for front axle brake system to fix brake discs typ Cupra R diameter 323x28mm in combination with Porsche 996 Brembo brake calipers on VW vehicles.
- ✓ for front axle: VW Golf Mk3 VR6, Passat VR6, Corrado VR6, Seat Toledo
- ✓ brake caliper: Porsche 996, reference 996.351.422 + 996.351.421 (only 100% suitable with the specified Porsche calipers)
- ✓ brake disc: Audi S3 (8L) /Golf Mk4 GTI 312x25 mm, reference 8N0 615 301 A
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ wheel hub conversion for 5x112 pitsch circle diameter (PCD) on front axle for VW Golf MK2 MK3, Passat Corrado with VR6 axle
- ✓ steering angle limiter / turning angle reducer
Cylinder head screw with hexagon socket high-strength
Size: M08x75
Surface galvanized
Quality 10.9
Hexagonal socket head cap srew high resistance entirely thread
Type: M12x35
Thread 1.5
Blank
Quality 12.9
Hexagonal socket head cap screw high resistance partial thread
Type: M12x60
Thread 1.5
Blank
Quality 12.9
Hexagonal socket head cap screw high resistance entirely thread
Type: M10x30
Thread 1.25
Blank
Quality 12.9
Adapter with reduction from M12x1,0 on M10x1,0(inner thread)for connection between brake hose and braking force regulator.