Gesucht nach Audi | A4 Cabriolet | 1.8 T | 8H7
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ 1x clutch disc 240mm suitable for VW Golf MK4 1.8T GTI Bora V5 V6 Passat Audi A3 A4 A6 TT Seat Leon Ibizia
- ✓ transmittable torque [Nm]: 600
- ✓ diameter [mm]: 240
- ✓ number of teeth: 23
- ✓ hub profile: 21,8x24 2-23N
- ✓ torsion spring clutch disc with sinterpad clutch coating/lining
- ✓ lightened flywheel for VW Golf MK4 Bora Audi A3 S3 TT Seat Leon & Ibiza. Models with 1,8 T 20 V turbo engine and 240 mm clutch
- ✓ total weight: 5,0 kg / saving weight compared to the original: 7,0 kg
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x clutch disc 228mm suitable for VW Passat 3bg Audi TT A3 A4 B5 B6 A6 4b C5 with 1.8T engines (longitudinally installed)
- ✓ transmittable torque [Nm]: 600
- ✓ diameter [mm]: 228
- ✓ number of teeth: 28
- ✓ hub profile: 20.3x22 x2-28N
- ✓ torsion spring clutch disc with sinterpad clutch coating/lining
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ reinforced Sachs Motorsport pressure plate for: VW Golf MK4 1.8T GTI Bora V5 V6 Passat Audi A3 A4 A6 TT Seat Leon Ibizia 240mm
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ Zimmermann brake disc 288x25 Manufacturer's ref. no.: 100.1216.52
- ✓ Audi A4 1.8 T quattro TDI VW Passat 1.9 TDI V6 Seat Skoda
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann Disque de frein 312x25 Numéro de fabrication : 100.1242.20
- ✓ Audi A4 1.8 T quattro 2.5 TDI Seat
- ✓ Zimmermann sports brake disc 300x22 Manufacturer's ref.: 100.3316.20
- ✓ Audi A4 Avant Cabriolet 3.0 quattro TDI TFSI
- ✓ Zimmermann Brake Disc 300x22 Manufacturer Number 100.3316.52
- ✓ Audi A4 3.0 quattro TDI TFSI
- ✓ Zimmermann brake disc 312x25 manufacturer's ref. no.: 100.1242.52
- ✓ Audi A4 1.8 T quattro 2.5 TDI Seat
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 76,00 mm
- ✓ external diameter: 79,00 mm
Adapter with reduction from M12x1,0 on M10x1,0(inner thread)for connection between brake hose and braking force regulator.
Adapter with reduction from M12x1,0 on M10x1,0(inner thread)for connection between brake hose and braking force regulator.
- ✓ EBC ultra-high performance brake fluid 500 ml
- ✓ to reduce corrosion within the braking system
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 57,10 mm
- ✓ external diameter: 65,00 mm
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Brake disc bolt circle drilling special design
- ✓ Drill an additional 2nd bolt circle in the brake disc
- ✓ Turn up hub diameter
- ✓ for vehicle with PCD : 98mm until up 120mm
- ✓ wheel hub diameter : maximal 77,,9
- ✓ enlargement per wheel : 3mm