Gesucht nach Skoda | Yeti | 1.4 TSI | 5L
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
Clutch booster kit with new multi-plate discs for all DQ250 (02E) gearboxes, installed in e.g: Golf 5 Eos Beetle Passat Audi A3 TT and many more.
- ✓ optional direct installation
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for Audi A3 S3 quattro, VW Golf MK5 3.2 R32 4 motion, etc.
- ✓ wishbone with steering bar/rod and screw set
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ 2x tie rods / wishbones for VW Golf Mk5 Mk6 Jetta 3 4 and Audi A1 quattro and many more
- ✓ camber adjustable for the rear axle
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M16x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ for rear axle: VW Eos, Passat, Scirocco, Sharan, Audi Q3, Audi TT / TT Roadstar, Seat Alhambra, Skoda Yeti
- ✓ brake caliper: Porsche Cayenne, rear axle, reference 955.352.421 + 955.352.422 (only 100% suitable with the specified Porsche calipers) Brembo Left: 20.7673.03 Right: 20.7673.04
- ✓ rear brake caliper for handbrake: VW Scirocco R, reference 8J0 615 424 B / 8J0 615 423 B
- ✓ Brake caliper mounting bracket: VW Scirocco R, reference 1K0 505 435 M / 1K0 505 436 M
- ✓ brake disc: original Audi RS7 Wave 356x22 mm, reference 4G0.615.601E
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ Joint set for the 6-speed 02M 02Q transmission
- ✓ Also suitable for our drive shafts for the 02M 02Q transmission
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ assembly position: rear
- ✓ suitable for Audi A6 Avant 3.0 quattro
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ for rear axle: VW Passat 3C B6, Scirocco, Audi Q3, TT, etc.
- ✓ brake caliper: VW Touareg / Porsche Cayenne, Panamera from the rear axle that was originally installed with 330x28mm brake discs. Reference 7P0.615423 / 7P0.615424 ; reference Porsche: 958.352.423.25 / 958.352.424.25
- ✓ handbrake calipers with mounting bracket from Golf 7R, reference 8V0 615 424 B / 8V0 615 423 B
- ✓ brake disc: original Audi A6 4G 356x22 mm, reference 4H0615601F
- ✓ perforated wave brake disc from the Audi RS7 356x22 mm, reference 4G8.615.601
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
Hexagonal screw entirely thread
Type: M08x30
Galvanized
Quality: 8.8
Hexagonal screw high resistance entirely thread
Type: M16x40
Thread: 1.5
Galvanized
Quality: 10.9
Hexagonal socket head cap screw high resistance with partial thread
Type: M12x70
Thread 1.5
Blank
Quality 10.9
Cylinder head screw with hexagon socket high-strength
Size: M08x75
Surface galvanized
Quality 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal socket head cap screw entirely thread
Type: M12x35
Stainless steel (V2A)
- ✓ Bracket Z17 ZR17 ZR18 Z18 6 piston Porsche brake caliper
Hexagonal screw entirely thread
Type: M10x100
Galvanized
Quality: 8.8