Gesucht nach BMW | 1er Coupe | 135i | E82
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for front axle: BMW E92 E93 E91, etc.
- ✓ brake caliper: BMW F30/31 4-piston, reference left: 34116799469 / right: 34116799470
- ✓ brake disc: BMW M2/3/4 , front axle, 380x30mm, referencer: left: 34112284809 / right: 34112284810
- ✓ clutch pin / clutch locking pin made of brass for all common BMW models such as e.g. E30 E46 E81 E88 and much more
- ✓ for BMW N54 engines 6 holes installed in:
- ✓ BMW 3er 335i 335ix 335i xDrive ( E90 E91 E92 )
- ✓ BMW 3er 335i ( E93 )
- ✓ BMW 1er Coupe 135i M ( E82 )
- ✓ BMW 1er Cabrio 135i ( E88 )
- ✓ BMW X6 xDrive 35i ( E71, 72 )
- ✓ BMW Z4 sDrive 35i sDrive 35is ( E89 )
- ✓ total weight: 8,9 kg / saving weight compared to the original: 5,1 kg
- ✓ for front axle: BMW E92 E93 E91 E90 etc.
- ✓ brake caliper: BMW Performance 6-piston135i, reference 34 11 6 786 741
- ✓ brake disc: BMW E46 M3 CSL , front, 345x28mm, reference : 3411 2 282 446
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 1x clutch disc 240mm suitable for Audi 80 90 100 200 Coupe A6 S2 A4 2.7T Allroad
- ✓ transmittable torque [Nm]: 600
- ✓ diameter [mm]: 240;
- ✓ number of teeth: 26
- ✓ hub profile: 32,5x35-26N
- ✓ torsion spring clutch disc with sinterpad clutch coating/lining
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ flywheel kit consisting of lightened flywheel, spring sinterpad clutch disc and pressure plate with reinforced design
- ✓ suitable for:
- ✓ BMW 3 series 335i 335ix 335i xDrive ( E90 E91 E92 )
- ✓ BMW 3 series 335i ( E93 )
- ✓ BMW 1 series Coupe 135i M ( E82 )
- ✓ BMW 1 series Cabrio 135i ( E88 )
- ✓ BMW X6 xDrive 35i ( E71, 72 )
- ✓ BMW Z4 sDrive 35i sDrive 35is ( E89 )
- ✓ BMW 7 series 740i, LI 09.08-06.12 240KW 2.8L ( F01 )
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ assembly position: front
- ✓ Suitable for BMW 1er E81 1er Cabriolet E88 1er Coupe E82
- ✓ assembly position: front
- ✓ suitable for BMW 1er E81 1er Cabriolet E88 1er Coupe E82
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ spare bolts for cardan shaft flange
- ✓ external diameter: 16mm
- ✓ internal diameter: 14mm
- ✓ length: 20mm
- ✓ material: stainless steel
- ✓ steering angle limiter / turning angle reducer / diameter 28 mm
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
Cylinder head screw with hexagon socket high-strength
Size: M08x75
Surface galvanized
Quality 10.9
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ external diameter: 22mm
- ✓ internal diameter: 11mm
- ✓ length: 57mm
- ✓ material: steel
Cylinder head screw with hexagon socket, high-strength, with thread up to the head (flat head)
Size: M8x20
Gradient: 1.25 (default)
Surface: blank
Quality: 10.9