Gesucht nach BMW | 1er Coupe | M | E82
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ clutch pin / clutch locking pin made of brass for all common BMW models such as e.g. E30 E46 E81 E88 and much more
- ✓ for BMW N54 engines 6 holes installed in:
- ✓ BMW 3er 335i 335ix 335i xDrive ( E90 E91 E92 )
- ✓ BMW 3er 335i ( E93 )
- ✓ BMW 1er Coupe 135i M ( E82 )
- ✓ BMW 1er Cabrio 135i ( E88 )
- ✓ BMW X6 xDrive 35i ( E71, 72 )
- ✓ BMW Z4 sDrive 35i sDrive 35is ( E89 )
- ✓ total weight: 8,9 kg / saving weight compared to the original: 5,1 kg
- ✓ for front axle M model: BMW E92 E93 E91 E90, etc.
- ✓ brake caliper: BMW M5 F10 6-piston, reference 34117852119, 34117852120
- ✓ brake disc: BMW M5 F10, front axle, 400x36mm, reference 34112284101, 34112284102
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 1x clutch disc 240mm suitable for Audi 80 90 100 200 Coupe A6 S2 A4 2.7T Allroad
- ✓ transmittable torque [Nm]: 600
- ✓ diameter [mm]: 240;
- ✓ number of teeth: 26
- ✓ hub profile: 32,5x35-26N
- ✓ torsion spring clutch disc with sinterpad clutch coating/lining
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ flywheel kit consisting of lightened flywheel, spring sinterpad clutch disc and pressure plate with reinforced design
- ✓ suitable for:
- ✓ BMW 3 series 335i 335ix 335i xDrive ( E90 E91 E92 )
- ✓ BMW 3 series 335i ( E93 )
- ✓ BMW 1 series Coupe 135i M ( E82 )
- ✓ BMW 1 series Cabrio 135i ( E88 )
- ✓ BMW X6 xDrive 35i ( E71, 72 )
- ✓ BMW Z4 sDrive 35i sDrive 35is ( E89 )
- ✓ BMW 7 series 740i, LI 09.08-06.12 240KW 2.8L ( F01 )
Hexagonal nut M08
Thread right
Galvanized
- ✓ for front axle: BMW E92 M E93 M E91 M, etc.
- ✓ brake caliper: Porsche 997 6-piston , reference 997.351.431 left+ 997.351.432 right
- ✓ brake disc: BMW M2 M3 M4 380x30 , reference 34 11 2 284 809 left+ 34 11 2 284 810 right
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann Brake Disc 360x30 two-piece Manufacturer's ref. 150.3457.70
- ✓ Brake discs BMW 1 Series Coupe (E82), 3 Series (E90), 3 Series Coupe (E92), 3 Series Cabriolet (E93)
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ high-quality wheel / lug nuts with cone collar 60° M12x1.5 with the best rust protection
Hexagonal socket head cap screw entirely thread
Type: M12x20
Stainless steel (V2A)
- ✓ brake line screw adapter, suitable for internal thread M10x1,0 to internal thread M10x1,0
Hexagonal socket head cap screw high resistance with partial thread
Type: M12x70
Thread 1.5
Blank
Quality 10.9
Hexagonal socket head cap screw high resistance with partial thread
Type: M12x80
Thread 1.5
Blank
Quality 12.9
Cylinder head screw with hexagon socket high-strength
Size: M08x75
Surface galvanized
Quality 10.9
- ✓ spare bolts for cardan shaft flange
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
Cylinder head screw with hexagon socket high-strength
Size: M08x75
Surface: galvanized
Quality: 10.9