Gesucht nach VW | Arteon | 2.0 TDI | 3H7, 3H8
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for front axle with alloy steering knuckle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda
- ✓ brake caliper: Porsche Cayenne 958 GTS Panamera, reference 7PP615149J / 7PP615150J (Shank length from the brake caliper for the screws 82mm)
- ✓ brake disc: Mercedes Benz GL - Klasse 375x36mm, reference 166 421 0912
- ✓ for front axle: Golf 7 8 Audi A3 8V Seat Skoda, etc.
- ✓ brake caliper: Porsche Cayenne 958 GTS Panamera / brake caliper 390mm brake system reference: 7PP615149J / 7PP615150J ((brake caliper for the 390mm system)
- ✓ brake disc: Mercedes Benz GL - Klasse 390x36mm reference: 166 421 0512
- ✓ complete brake system for front axle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda u.v.m.
- ✓ Brake caliper: Porsche Cayenne 958 GTS Panamera brake caliper part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper for the screws 82mm)
- ✓ Brake Disc: MERCEDES-BENZ ML/GL-KLASSE 375x36mm Part Number: 166 421 0912
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for front axle: Golf MK7 and Audi A3
- ✓ brake caliper: Audi R8 6-piston , reference left 420615107A / right 420615108A
- ✓ brake disc: ceramic Audi R8 380x38mm, reference 420.615.301K
- ✓ 2x centric rings 65,10x68,00x7,00mm
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ for front axle with aluminium stub axle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda
- ✓ Porsche Cayenne 958 GTS Panamera brake calipers part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper for the screws 82mm)
- ✓ Brake discs from Mercedes Benz CLS 500 Coupe 360x36mm part number: A0004211712 / A2184210212
- ✓ Joint set for the 6-speed 02M 02Q transmission
- ✓ Also suitable for our drive shafts for the 02M 02Q transmission
- ✓ for front axle: VW Golf MK7 Audi A3 series.
- ✓ brake caliper: Audi RS4 RS5 8-piston original Brembo, reference left 8E0615107 right E0615108
- ✓ brake disc: Audi RS4 B5 360x32mm, reference 8D0615302B or RS4 B7 365x34mm, reference8E0615301AB
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
Hexagonal socket head cap screw high resistance with chute
Type: M10x80
Blank
Quality 12.9
- ✓ for vehicle with PCD : 98mm until up 120mm
- ✓ wheel hub diameter : maximal 77,,9
- ✓ enlargement per wheel : 3mm
Hexagonal socket head cap screw entirely thread
Type: M12x20
Stainless steel (V2A)
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 57,10 mm
- ✓ external diameter: 66,90 mm
- ✓ steering angle limiter / turning angle reducer
Cylinder head screw with hexagon socket flat head
Size: M10x50
Surface: galvanized
Quality: 8.8
- ✓ auxiliary tool for rim assembly of all vehicles with M14x1,5 thread on the wheel hub, for example, VW Golf MK4, MK5, Audi A3 etc.
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 65,10 mm
- ✓ external diameter: 68,00 mm