Gesucht nach Opel | Manta B CC | 1.9 S | 53, 55
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
1 complete set of stiffening plates for the reinforcement of the entire Opel Kadett C car body.
- ✓ front axle reinforcement plates for all Opel Kadett C models like the original 1000 series
- ✓ for Manta B, Ascona B, Kadett C
- ✓ engine: 2,0l OHC 16V and 8V (C20NE , C20XE)
Additional stiffening plates for front axle spring holder on Opel Kadett C.
- ✓ 1 set of mounting brackets / welding supports for a front strut bar on model Kadett C (right and left)
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ reinforcement plates for the front suspension strut brace / tower on the Opel Kadett C body
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ reinforcement plates for the front wishbones on all Opel Kadett C, Ascona B, Manta models
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
Full adaptation/fixation kit for brake system coming originally from Kadett E Calibra Vectra A Astra GSI /16V C20XE.
For installation on front axle of Opel Manta B Ascona B Kadett C Limo Coupe and City.
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ reinforcing plate / underride bar, front axle, for all Opel Kadett C models, like the original in the 1000th series
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ for rear axle: Kadett C,Manta,Ascona B with the small brake drum
- ✓ brake caliper: VW or Audi Girling 38
- ✓ brake disc: Audi 80 245x10mm (YoC 86-96)
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
Stiffening plates for front suspension on Opel Kadett C car body.
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
Stiffening plates for bulkhead on Opel Kadett C car body.
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Hexagonal socket head cap screw entirely thread
Type: M12x20
Stainless steel (V2A)
- ✓ centric ring for brake disc
- ✓ internal diameter: 63,50 mm
- ✓ external diameter: 65,00 mm
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 57,00 mm
- ✓ external diameter: 68,00 mm
Hexagonal socket head cap screw high resistance with partial thread
Type: M10x60
Thread 1.0
Blank
Quality 12.9
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x25
Thread 1.5
Blank
Quality 10.9
Hexagonal socket head cap screw high resistance entirely thread
Type: M10x35
Thread 1.00
Blank
Quality 12.9
Cylinder head screw with hexagon socket high-strength
Size: M08x75
Surface: galvanized
Quality: 10.9