Gesucht nach VW | Transporter III Pritsche/Fahrgestell | 1.7 D | --
- ✓ gearbox adapter plate for VW T3 transporter / van to install a 012 Audi / Passat 5-speed gearbox
- ✓ for all VW T2, T3 bus transporter
- ✓ engine: to 1,9l TDI (116 HP) AFN
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for all VW T2, T3 bus
- ✓ engine: to 1,9l TDI (90PS) 1Z
Full adaptation/fixation kit for installation of brake disc system T4 on rear axle of VW T3 Bus.
- ✓ drive shaft adapter for the VW T3 transporter to continue using the original drive shafts, also with the 012 Audi gearbox
- ✓ for e.g VW T3 bus / transporter. Length 50cm
- ✓ connection 1 M10x1 external thread straight
- ✓ connection 2 M10x1 internal thread straight
- ✓ transparent covered
- ✓ mounting bracket / holder / support for conversion to 012 VW / Audi 5-speed gearbox on model VW T3 transporter
Full front axle adaptation/fixation kit for installation of brake disc system from Audi A6 with
disc diameter 312x25mm in combination with Audi A6 brake calipers…..
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ for all T3 bus / transporter with diesel engine from Yoc 84
- ✓ hydromount / hydraulic bearing for all T3 bus / transporter with diesel engine from Yoc 84 and as manufacturer reference for Toledo, Golf MK3, etc
- ✓ for rear axle: VW T3 Bus
- ✓ brake caliper: VW Bus T4
- ✓ brake disc: VW Bus T4 280x12mm (15 inch) or 294x13,5mm (16 inch)
- ✓ anti-theft protection system for pedals on T2 T3 bus, also Syncro Doka Pritsche Bulli
Full front axle adaptation/fixation kit for installation of brake disc system from Audi A6 with
disc diameter 312x25mm in combination with Audi A6 brake calipers…..
VW T3 BUS Rear axle brake adapter Girling 38 Brake disc transformation 268x10mm Brake caliper adapter
- ✓ wheel bearing kit for VW T3 transporter (one side) Suitable for all T3 buses built between 08/83 and 07/92 (except Syncro)
- ✓ for front axle: VW T3 bus 2WD
- ✓ brake caliper: Audi 100/A6 C4 Girling/ ATE 57 referecne: 4A0615123A + 4A0615124A
- ✓ brake disc: Audi A4 Quattro, Audi A6 288x25mm
Wheel hub for front axle brake system conversion for installation of Audi A6
disc diameter 312x25mm in combination with Audi A6 brake calipers…
- ✓ engine mounting bracket / holder / support set for conversion of all VW T2/ T3 bus transporter van (also Syncro)
- ✓ to ASZ 1.9 TDI PD 131PS engine, installed in Golf MK4 Audi A3 Seat Leon, etc
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for front axle: T3 transporter before year of manufacture 1986 with M12 screw mount on the axle
- ✓ brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A
- ✓ brake disc: Audi A4 quattro, Audi A6 312x25mm, reference e.g 4B0 615 301 A
- ✓ for rear axle: VW T3 bus
- ✓ brake caliper: Porsche reference : 996.352.421 + 996.352.422
- ✓ brake disc: A4 S4 rear axle 300x22mm reference : 8E0 615 601 R
- ✓ for rear axle: VW T3 Bus
- ✓ Brake caliper: VW Golf 3 4 G60 VR6 Girling 38 parts NR. 1H0698451F
- ✓ Brake disc: VW Sharan 2.8 VR6 (7M8, 7M9, 7M6) 268x10mm VW NR. 7M0615601
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Tailor-made Wheel hub for for installation of brake disc system on rear axle of VW T3 Bus.
- ✓ for front axle VW T3 bus transporter Van
- ✓ brake caliper: Porsche Boxter S, reference 996.351.426 + 996.351.425
- ✓ brake disc: Mercedes S-Klasse 312x28 , reference WD00604
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for all T3 bus. Diesel engines , YoC from 84
- ✓ for conversion to hydraulic bearing, reference: 3A0.199.402
- ✓ for front axle: VW T3 bus 2WD (not Syncro)
- ✓ brake caliper: Audi 100/A6 C4 Girling/ ATE 57 referecne: 4A0615123A + 4A0615124A
- ✓ brake disc: Audi A4 Quattro, Audi A6 288x25mm
- ✓ for all VW T2, T3 bus
- ✓ engine: to 1,9l TDI (131PS) ASZ
- ✓ 2x drive shaft adapters in order to install the stable drive shafts from T3 Syncro onto 2WD
- ✓ angle plates / exhaust mounting bracket for the VW T3 transporter/utility, engine conversion to 1.9l TDI AFN
- ✓ brake caliper adapter for front axle: VW T3 bus/transporter/van
- ✓ brake disc: Audi A6 347 x 30 mm, reference 4F0615301G
- ✓ brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference 8E0615124B
- ✓ 2 x required wheel hubs
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ for front axle: VW T3 Bus
- ✓ brake caliper: Porsche Boxter S , reference 996.351.426 + 996.351.425
- ✓ brake disc: Mercedes S-Klasse 312x28 , reference 220 421 09 12
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
Hexagonal nut M08
Thread right
Galvanized
- ✓ for front axle: T3 transporter before Year of Manufacture 1986 with M12 screw mount on the axlee
- ✓ brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A
- ✓ brake disc: Audi A4 quattro, Audi A6 312x25 mm, reference 4B0 615 301 A
- ✓ brake caliper adapter for front axle: VW T3 bus/transporter/van
- ✓ brake disc: Audi A6 347 x 30 mm, reference 4F0615301G
- ✓ brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference 8E0615124B
- ✓ for front axle: VW T3 Bus
- ✓ brake caliper: Porsche Boxter S , reference 996.351.426 + 996.351.425
- ✓ brake disc: Mercedes S-Klasse 312x28 , reference WD00604
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ steering angle limiter / turning angle reducer
- ✓ EBC ultra-high performance brake fluid 500 ml
- ✓ to reduce corrosion within the braking system
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ steering angle limiter / turning angle reducer
- ✓ steering angle limiter / turning angle reducer suitable for many vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ 2-part steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles