Gesucht nach VW | Transporter III Kasten | 1.9 | --
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for all VW T2, T3 bus
- ✓ engine: to 1,9l TDI (90PS) 1Z
- ✓ for all VW T2, T3 bus transporter
- ✓ engine: to 1,9l TDI (116 HP) AFN
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
Full front axle adaptation/fixation kit for installation of brake disc system from Audi A6 with
disc diameter 312x25mm in combination with Audi A6 brake calipers…..
- ✓ wheel bearing kit for VW T3 transporter (one side) Suitable for all T3 buses built between 08/83 and 07/92 (except Syncro)
- ✓ engine mounting bracket / holder / support set for conversion of all VW T2/ T3 bus transporter van (also Syncro)
- ✓ to ASZ 1.9 TDI PD 131PS engine, installed in Golf MK4 Audi A3 Seat Leon, etc
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ for front axle: T3 transporter before year of manufacture 1986 with M12 screw mount on the axle
- ✓ brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A
- ✓ brake disc: Audi A4 quattro, Audi A6 312x25mm, reference e.g 4B0 615 301 A
- ✓ camber correction / adjustement plates for installation on rear axle to adjust camber and track an .Thanks to this plate you can modify the camber negative and positive.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ for front axle: T3 transporter before Year of Manufacture 1986 with M12 screw mount on the axlee
- ✓ brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A
- ✓ brake disc: Audi A4 quattro, Audi A6 312x25 mm, reference 4B0 615 301 A
- ✓ brake caliper adapter for front axle: VW T3 bus/transporter/van
- ✓ brake disc: Audi A6 347 x 30 mm, reference 4F0615301G
- ✓ brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference 8E0615124B
- ✓ 2 x required wheel hubs
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ brake caliper adapter for front axle: VW T3 bus/transporter/van
- ✓ brake disc: Audi A6 347 x 30 mm, reference 4F0615301G
- ✓ brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference 8E0615124B
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ 1x hydraulic steering gear as shown including tie rods for your VW T3 transporter, platform, utility and T3 chassis
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ blanking / lock / sealing plug made of aluminum black anodized for all brake calipers with M10x1 thread
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
Hexagonal socket head cap screw high resistance with partial thread
Type: M06x20
Blank
Quality 8.8
- ✓ cylinder-head bolts with hexagon socket, flat head, high-strength
- ✓ dimension: M14x100
- ✓ alloy blank
- ✓ quality 10.9
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x20
Thread: 1.5
Blank
Quality: 10.9
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles