- ✓ for front axle: Golf MK1, Golf MK1 Cabrio, Caddy 14d, Jetta 1, Scirocco
- ✓ brake caliper: Girling/Lucas 54 G60
- ✓ brake disc: G60 280x22mm , reference 535615301
- ✓ for rear axle: Golf MK5 Mk6, Audi S3 8P Seat Leon Cupra Altera
- ✓ brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 (only 100% compatible with the specified Porsche caliper) Brembo left 20.7673.03 / right 20.7673.04
- ✓ rear brake caliper for handbrake: Golf MK5 R
- ✓ brake disc: original Golf 5 R 310x22 mm , reference 1K0 615 601 N
Braking force regulator for conversion of brake disc system on Golf 1.For the installation of Golf 2/3 G60 V16 brake disc system on rear axle of the above mentioned vehicle.
- ✓ suspension control arm / wishbone Golf MK4, Audi S3, Audi TT, VW Bora, Seat Leon, etc.
- ✓ for VW Golf MK 4 Audi A3 Polo, etc
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ lenght: 57cm / transparent covered
- ✓ bush / bushing / sleeve for the 5th BMW series 520i E9 axle stub , steering rod link, control arm, front left right
High resistant rubber bearing kit for engine and gearbox.For installation on Golf 1. Perfect for motor conversion on VR6 or V16 engine.
- ✓ for Golf 1 series, e.g. Caddy 14d Corrado Scirocco Jetta
- ✓ Engine: Basis Golf 4 Audi A3 etc.
- ✓ Gearbox: 5-speed 02A / 02J based on Golf 3 and 4
Gearbox cradle for gearbox exchange.For installation of gearbox typ 02M with 6 gears on Golf 2 3 Passat Corrado Jetta Vento.
- ✓ bush for wishbone / control arm on 5er BMW series E39 axle stub, wheel bearing housing front left right
- ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable
- ✓ for front axle: Audi A3, TT, Golf MK4, Bora, Beetle, Polo, Seat Ibiza, Leon
- ✓ brake caliper: Porsche Cayenne ZR18 ZL18 , reference 95535142153 + 95535142253
- ✓ brake disc: R32 334x32mm
Complete kit of repair plates for the support of the rear axle on the body of BMW E46 revealing cracks.
- ✓ for front axle BMW: 1, 2 series F20, F21, F22 and F23, as well as the 3 and 4 series F30, F31, F32, F33, F34, F36
- ✓ brake caliper: BMW F20 M 4-piston, reference left 34116799465 / right 34116799466
- ✓ brake disc: BMW M2 M3 M4, front axle, 380x30mm, reference left 34112284809 / right 34112284810
- ✓ setting / adjust gauge to adjust the 4 and 5 speed 020 gearbox on VAG Golf MK1 MK2 MK3 models, gear shift linkage
- ✓ gas pedal / accelerator pedal adapter / throttle control adapter for Golf 2, Corrado. Conversion to Golf MK4 engine
- ✓ for all G60 GTI 16V / TDI engines
- ✓ e.g 1,8T Golf 4, Audi A3 with 5 speed gearbox
- ✓ total weight: 4,1 kg / saving weight compared to the original: 4,9 kg
- ✓ intake manifold conversion kit on BMW E36 2.8i models to install a manifold of BMW M50 M52 models.
- ✓ for Golf MK2 and MK3 for exeample Corrado Jetta Passat
- ✓ conversion to mechanical clutch
- ✓ conversion kit to hydraulic clutch Golf MK4 Audi A3 TT
- ✓ suitable for Golf MK2, VW Jetta, Corrado and Passat 35i
- ✓ for e.g. VW Golf MK5 MK6 MK7 Audi A3 etc...
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ lenght: 63 cm / transparent covered
- ✓ bushing / bush / sleeve for the wishbone multi-link axle, tension strut, made of high-strength steel for the Audi A4 A6, VW Passat, Skoda Superb series
- ✓ for Golf 1 series, e.g. Cadyy 14d Corrado Scirocco Jetta.
- ✓ Engine: base Golf 3, Golf 4 Audi A3 etc..
- ✓ Gearbox: 5-speed 02A/02J and CDA from base Golf 3 and 4
- ✓ reinforced clutch release lever for all 02A and 02J 5 speed gear
- ✓ rim centric ring / extension bush, high-strength steel, for VW Golf MK4 Polo 9N Bora Audi A3 TT
- ✓ large master brake cylinder / main brake cylinder, ideal on all models Golf MK1 Caddy Scirrocco Jetta for a brake conversion to G60 brake. Necessary in order to reach the better volumetric efficiency of the brake and the full brake pressure.
- ✓ 6 speed 4Motion 4WD gearbox conversion kit to convert into a 2WD front-wheel drive. Thus, the 6 speed 02M gearbox can be installed on any front-wheel drive vehicle.
Short shifter in stainles steel.Tailor-made for VW vehicles with cylinder capacity from 1,5 ltr on as Golf 1, Jetta 1, Caddy 14d , Scirocco 1 and 2.
- ✓ steering angle limiter / turning angle reducer suitable for all BMW E30 and E36
- ✓ conversion kit to hydraulic clutch Golf MK4
- ✓ suitable for VW Golf 1, Caddy 14D, Scirocco usw.
- ✓ for all BMW with M50 M52 and M54 engines installed in:
- ✓ BMW 3 Series 320i 325i 323i 328i ( E36 )
- ✓ BMW 3 Series Compact 323ti ( E36 )
- ✓ BMW 3 series coupe 320i 323i 325i 325is 328i ( E36 )
- ✓ BMW 3 series convertible 320i 323i 325i 328i ( E36 )
- ✓ BMW 3 Series Touring 320i 323i 328i ( E36 )
- ✓ BMW 3 Series 320i 323i 325i 325xi 328i 330i 330xi ( E46 )
- ✓ BMW 3 Series Compact 325ti ( E46 )
- ✓ BMW 3 Series Coupe 320Ci 323Ci 325Ci 328Ci 330Ci 330xi ( E46 )
- ✓ BMW 3 Series Convertible 320Ci 323 Ci 325Ci 330Ci ( E46 )
- ✓ BMW 3 series Touring 320i 325i 325xi 328i 330i 330xi ( E46 )
- ✓ BMW 5 series 520i 523i 525i 528i 530i ( E39 )
- ✓ BMW 5 series Touring 520i 523i 525i 528i 530i ( E39 )
- ✓ BMW 5 series 520i 24V 525i 24V 525ix 24V ( E34 )
- ✓ BMW 5 series Touring 520i 525i 525ix ( E34 )
- ✓ BMW 5 series 520i 525i 530i ( E60 )
- ✓ BMW 5 series Touring 525i ( E61 )
- ✓ BMW 7 series 728i,iL ( E38 )
- ✓ BMW 7 series 730i, Li ( E65 E66 )
- ✓ BMW Z3 2.0i 2.8i ( E36 )
- ✓ BMW Z4 2.2i 2.5i 3.0i ( E85 )
- ✓ BMW X3 2.5i 3.0i xDrive ( E83 )
- ✓ Total weight: 5,8 kg / Savings compared to original: 6,2 kg
- ✓ 1.for front axle: Golf 4 Jubi, Golf 4 V6, Audi S3, Audi TT 225 PS
- ✓ 1.brake disc: 312x25
- ✓ 2.for front axle: Golf 4R32, Audi S3, Audi TT
- ✓ 2.brake disc: 334x32
- ✓ for the steel front axle on: VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and more.
- ✓ brake caliper: Porsche Cayenne or VW Touareg reference. 955.351.421.50 + 955.351.422.50
- ✓ brake disc: Mercedes 5x112 PCD 350x32mm reference : 164 421 05 12 + A 164 421 05 12
- ✓ large master cylinder / main brake cylinder, ideal on all VW models without ABS for a brake conversion to Porsche brake. Or simply to increase the original brake pressure.
- ✓ reinforced engine mounting bracket for VW Golf MK2, MK3, Passat, Corrado, Jetta, Vento
- ✓ gas pedal / accelerator pedal adapter / trottle control adapter
- ✓ Golf MK1 Caddy Scirocco
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
Brake caliper adapter for front axle brake disc system to fix Porsche /Brembo ZR17 6 piston brake calipers with R32 brake disc,diameter 334 x 32mm.
- ✓ engine and gearbox mounting bracket kit for conversion to 02M/ R32 V6 1,8T 6-speed transmission, combined with the VR6 R32 engine in Golf MK2, MK3, Vento
- ✓ for front axle: Audi A3,S3,TT, Golf MK 4, Bora , Beetle, Polo, Seat Ibiza, Leon
- ✓ Brake caliper: Porsche Cayenne, reference 7L6 615 123 T + 7L6 615 124 T
- ✓ Brake disc: Golf MK4 R32 334x32mm, reference 1J0 615 301AA + 1J0 615 302 A
Gearbox mounting bracket kit, in order to install a control cable gearbox 02A for conversion to VR6 or G60 engine in Golf 1, Caddy 14d, Scirocco Jetta 1 & 2.
- ✓ gearbox adapter plate for VW T3 transporter / van to install a 012 Audi / Passat 5-speed gearbox
- ✓ for e.g VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, etc
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 57cm / transparent covered