Gesucht nach Seat | Leon | 1.8 20V T | 1M1
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ thin drive shaft for Golf MK4 series for lowered vehicles
- ✓ wheel hubs for conversion to 5x112mm Pitch Circle Diameter (PCD), rear axle on Front WD models like Golf MK 4 Bora Audi A3 TT TTRS RS3 Audi TT
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ short thin drive shaft for VW Golf MK4 Bora Audi A3 1,9TDI 6-speed.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ Zimmermann Brake Disc 280x22 Manufacturer Number 600.1601.20
- ✓ VW Golf GTI G60 Corrado Seat Cordoba Syncro
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ Zimmermann Brake Disc 280x22 Manufacturer's ref.: 100.1234.52
- ✓ VW Golf 4
- ✓ Joint set for the 6-speed 02M 02Q transmission
- ✓ Also suitable for our drive shafts for the 02M 02Q transmission
- ✓ VW Golf MK4 Audi A3 2.3 V5 4motion
- ✓ steering gear, axle joint and track rod ends
- ✓ for VW Golf MK 4, Bora 1.6 16V, Audi A3 1.6, Seat Toledo 2 1.6 16V, Skoda Octavia 1 1.9 SDI, etc
- ✓ control arm suspension / wishbone with bushing, axle joint and tie / steering rods
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ for VW Golf MK 4, Bora 1.6 16V, Audi A3 1.6, Seat Toledo 2 1.6 16V, Skoda Octavia 1 1.9 SDI, etc
- ✓ control arm suspension / wishbone with bushing, axle joint, steering bar / rod and track rod
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ Zimmermann Brake Disc 280x22 Manufacturer's ref.: 100.1234.20
- ✓ Audi VW A3 1.9 TDI quattro Golf 1.8 T GTI Seat Skoda
- ✓ Zimmermann Brake Disc 312x25 Manufacturer Number 100.1240.52
- ✓ VW Golf Bora Audi TT A3 GTI S3 V6 Seat Skoda Ibiza
- ✓ Zimmermann Brake Disc 288x25 Manufacturer Number 100.1235.52
- ✓ VW Golf 4 Polo Bora Audi A1 Seat Leon Skoda Octavia 1
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ stylish fan EPYTEC sticker white for e.g. rear window or body
- ✓ size: 155x33mm (width x height)
- ✓ external diameter: 25mm
- ✓ internal diameter: 10,2mm
- ✓ length: 1mm
- ✓ material: steel electrolytically galvanized
- ✓ cylinder-head bolts with hexagon socket, flat head, high-strength
- ✓ dimension: M7x60
- ✓ alloy blank
- ✓ quality 10.9
Hexagonal screw high resistance entirely thread
Type: M10x20
Thread: 1.25
Blank
Quality: 10.9
- ✓ external diameter: 25mm
- ✓ internal diameter: 12,2mm
- ✓ lenght: 1mm
- ✓ material: steel-electrolytically galvanized
Adapter with reduction from M12x1,0 on M10x1,0(inner thread)for connection between brake hose and braking force regulator.
- ✓ cross-head countersunk screw
- ✓ size:M06x16
- ✓ alloy: galvanized
- ✓ strength class 8.8
- ✓ steering angle limiter / turning angle reducer diameter 24 mm