Gesucht nach Seat | Ibiza II | 1.6i | 6K1

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
• ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle

• ✓ for all 1.4l, 1.6l 16V engines with 200mm clutch
• ✓ e.g. VW Polo 6N, VW Caddy 2, VW Caddy 2, Seat Arosa, Seat Cordoba, Seat Ibiza
• ✓ Total weight: 3.8 kg / Savings compared to the original: 2.5 kg
• ✓ for vehicles with 5-speed gearbox

Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.

• ✓ wheel hubs for conversion to 5x100mm bolt circle/PCD for the front axle Golf MK2, MK3 / Cabriolet, Variant, Golf MK4 Cabriolet, Passat, Variant, Vento, Caddy 2 box, Corrado, Seat Cordoba / Ibiza 2 / Toledo 2

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ bottom length: 30mm
• ✓ top length: 21mm
• ✓ width: 24mm

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 7m
• ✓ bottom length: 20mm
• ✓ top length: 23mm
• ✓ width: 18mm

• ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D

• ✓ 2x right steering knuckles / axle journals for VW Polo 6N2 Seat Arosa

• ✓ Zimmermann Sport brake disc 360x32 Manufacturer's ref.  100.3347.70 / 100.3348.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapters article 940, article 808 and article 830 
• ✓ Audi A4 Avant RS4 quattro

• ✓ eccentric for article 590 galvanized

• ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston

• ✓ 2x drum brake with 5x100 bolt circle suitable for the rear axle of VW Golf 1, 2, Jetta, Audi 80 and many other vehicles
• ✓ OE number: 171501615, 171501615B, 191501615, 191501615B, 171501615A, 823501615B, 171501615C

• ✓ Zimmermann Brake Disc 280x22 Manufacturer Number 600.1601.20
• ✓ VW Golf GTI G60 Corrado Seat Cordoba Syncro

Hexagonal nut M08
Thread right
Galvanized

• ✓ Zimmermann Brake Disc 226x10 Manufacturer's ref. 600.3219.52
• ✓ VW Golf II III IV 1.8 GTI 1.9 TDI Corrado Jetta II Passat Seat Ibiza

• ✓ eccentric for article 244, galvanized

• ✓ for all1,4l, 1,6l 16V engines
• ✓ e.g VW Polo 6N, VW Caddy 2, VW Caddy 2, Seat Arosa, Seat Cordoba, Seat Ibiza
• ✓ total weight: 4,4 kg / saving weight compared to the original: 1,9 kg

• ✓ gift voucher 50 Euro

• ✓ For front axle VW Golf Mk2 Jetta 2, year of construction up to 07/1987

• ✓ spacing plate / bush / bushing for brake caliper adapter

• ✓ 2x drive shaft adapters for VW Golf MK1

• ✓ hexagon nut: M10
• ✓ thread: right
• ✓ material: stainless steel

• ✓ Gift Voucher 30 Euro

• ✓ Gift Voucher 100 Euro

• ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line

Hexagonal coupling nut M8x30
Thread right
Galvanized

• ✓ Installation location: front
• ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford

• ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection

• ✓ 1x straight fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ Width: 24mm
• ✓ Height: 47mm

• ✓ Installation location: front
• ✓ Number of holes: 4
• ✓ Bolt circle: 100
• ✓ Diameter: 256mm
• ✓ Thickness: 20mm
• ✓ Height: 38mm

Hexagonal coupling nut M8x30
Thread right
Galvanized

Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized

Zinc-plated press-in nut M06 with right hand thread

Hexagon thin nut M08
Thread left
Galvanized

• ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material