Gesucht nach Skoda | Octavia II Combi | 2.0 TDi 16V | 1Z5
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ drive shaft for VW Golf MK5, MK6, for lowered vehicles
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ fine thin drive / transmission shaft VW Golf MK5 Mk6 series, lowered vehicles.
- ✓ for Audi A3 S3 quattro, VW Golf MK5 3.2 R32 4 motion, etc.
- ✓ wishbone with steering bar/rod and screw set
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ 2x tie rods / wishbones for VW Golf Mk5 Mk6 Jetta 3 4 and Audi A1 quattro and many more
- ✓ camber adjustable for the rear axle
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ thin and shorter drive shaft (without joints) for VW Touran, Passat, Variant, Golf 5, Golf 6, Audi A3 Sportback and Skoda Octavia
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ for Audi A3 3.2 V6 quattro, VW Golf MK5 2.0 TDI 4motion, etc.
- ✓ control arm / suspension / wishbone kit. front , with reinforced steering bars / rods and track rod ends
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ thin and shorter drive shaft (without joints) for VW Touran, Passat, Variant, Golf 5, Golf 6, Audi A3 Sportback and Skoda Octavia
- ✓ Joint set for the 6-speed 02M 02Q transmission
- ✓ Also suitable for our drive shafts for the 02M 02Q transmission
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ thin and 1 cm shorter drive shaft for VW Golf MK5, Golf MK6, Passat 3C, VW Touran and Audi A3
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ assembly position: rear
- ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ steering angle limiter / turning angle reducer
Hexagonal socket head cap screw high resistance entirely thread
Type: M10x30
Thread 1.25
Blank
Quality 12.9
Hexagonal socket head cap screw high resistance with partial thread
Type: M08x18
Blank
Quality 8.8
Hexagonal socket head cap screw high resistance entirely thread
Type: M10x30
Thread 1.25
Blank
Quality 12.9
- ✓ auxiliary tool for rim assembly of all vehicles with M14x1,5 thread on the wheel hub, for example, VW Golf MK4, MK5, Audi A3 etc.
cylinder head bolts with hexagon socket (flat head)
Size: M12x25
thread pitch 1.5
Surface blank
Qualitye 10.9
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 57,00 mm
- ✓ external diameter: 68,00 mm
Hexagonal socket head cap screw high resistance with partial thread
Type: M12x70
Thread 1.5
Blank
Quality 10.9
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 56,60 mm
- ✓ external diameter: 70,00 mm