Gesucht nach VW | Passat Variant | 2.0 TDI 4motion | 3C5
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for front axle with alloy steering knuckle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda
- ✓ brake caliper: Porsche Cayenne 958 GTS Panamera, reference 7PP615149J / 7PP615150J (Shank length from the brake caliper for the screws 82mm)
- ✓ brake disc: Mercedes Benz GL - Klasse 375x36mm, reference 166 421 0912
Clutch booster kit with new multi-plate discs for all DQ250 (02E) gearboxes, installed in e.g: Golf 5 Eos Beetle Passat Audi A3 TT and many more.
- ✓ optional direct installation
- ✓ complete brake system for front axle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda u.v.m.
- ✓ Brake caliper: Porsche Cayenne 958 GTS Panamera brake caliper part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper for the screws 82mm)
- ✓ Brake Disc: MERCEDES-BENZ ML/GL-KLASSE 375x36mm Part Number: 166 421 0912
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ drive shaft for VW Golf MK5, MK6, for lowered vehicles
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for rear axle: Audi TTRS, Passat, Audi Q3 series
- ✓ Brake callipers from Porsche Cayenne from rear axle part no: ( is written on the brake callipers, rear number differing right and left calliper) 955.352.421 + 955.352.422 (only 100% suitable with the specified Porsche callipers) Brembo left: 20.7673.03 right: 20.7673.04
- ✓ original brake calipers with carrier for handbrake from Audi TT partnumber: 1J0615423G / 1J0615424G carrier: 8J0615425G
- ✓ original Audi A6 A7 brake disc 356x22 mm part number: 4H0 615 601 F
- ✓ for Audi A3 S3 quattro, VW Golf MK5 3.2 R32 4 motion, etc.
- ✓ wishbone with steering bar/rod and screw set
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ for front axle: VW Passat B6, Sharan, Audi A3 8P
- ✓ Audi e-tron 6 piston brake calipers part number: 9J1.615.123 / 9J1.615.124 / 4J3615123C / 4J3615124C
- ✓ Brake discs from Audi A6 4G 400x38mm part number: 4H0 615 301 AL / 4H0 615 301 T
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ Zimmermann brake disc 310x22 Manufacturer's ref. 100.3309.52
- ✓ VW Golf MK5 MK6 MK7 Audi A3 TT Seat Leon Skoda Superb 2
- ✓ thinner and 1 cm shorter drive shaft for Audi A3, Sportback, Q3, VW Golf 5, 6, 4-motion, Passat 3c, Skoda Octavia 2, 3 Combi, Superb 2
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ for front axle with aluminium stub axle: VW Golf 7 8 Audi A3 Cupra Leon Seat Leon Skoda
- ✓ Porsche Cayenne 958 GTS Panamera brake calipers part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper for the screws 82mm)
- ✓ Brake discs from Mercedes Benz CLS 500 Coupe 360x36mm part number: A0004211712 / A2184210212
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ fine thin short drive shaft, right, for VW Golf MK4 R32, Audi TT 8N Quattro. Low-profile vehicle.
- ✓ Zimmermann Sport Brake Disc 345x30 Manufacturer's ref. 100.3301.52
- ✓ Suitable for: Audi A3 S3 2.0 TDI quattro VW Golf 5 6 GTI
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ for front axle: VW Passat B6, B7, B8, CC, Sharan, ...
- ✓ brake caliper: Audi RS7 A7 RS5, reference 4H0615107D / 4H0615106D
- ✓ brake disc: ceramic Audi RS5 400x38mm, reference 4K0615302D
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ PCD adapter / Pitch Circle adapter, spacer / track plate / exclusive and individual, custom-made manufacturing
- ✓ plates made of high-strength aircraft aluminum
- ✓ with engraved logo on the plate and material certificate for easier registration
Hexagonal socket head cap screw high resistance with partial thread
Type: M06x20
Blank
Quality 8.8
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 65,10 mm
- ✓ external diameter: 66,8 mm
- ✓ steering angle limiter / turning angle reducer / diameter 23 mm
Hexagonal socket head cap screw entirely thread
Type: M12x35
Stainless steel (V2A)
- ✓ lubricant developed by EBC itself
- ✓ optimized for use on brake systems
- ✓ exact viscosity for brakes
- ✓ do not use standard lubricants on brake systems
- ✓ for sliding pins, bolts, screws, bars on the brake calipers
- ✓ never apply to the surface
Adapter with reduction from M12x1,0 on M10x1,0(inner thread)for connection between brake hose and braking force regulator.
- ✓ brake caliper adapter custom-made manufacturing
- ✓ for front und rear axle
- ✓ information about the vehicle
