You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Lightened Flywheel VW Polo 9N Lupo GTI 1,6l 16V GK 3,1 kg steel light

€234.22*

Available
Delivery by Tuesday, 30.04.2024 if you order within the next 4 Hours.
Product number: 769
Weight: 3.3 kg

Lightened high-strength flywheel made of chrome molybdenum, suitable for following engines:

  • 1,6l 16V  on VW Polo 9N Lupo GTI models

Suitable for the following gearboxes:

  • 5 speed gearbox
  • 6 speed gearbox

Thanks to additional holes now only 3.3 kg light with the same quality.

Below in the matching accessories you will find the required Sachs Performance pressure plate and the matching organic clutch disc.

Advantages of our lightened flywheel:

  • our flywheel weighs only 3,7 kg, the standard wheel over 5.5 kg
  • all our flywheels are made of chrome moly steel with quality G 1.75, extremely suitable for high-speed motors
  • recognized for unlimited HP
  • significantly better acceleration due to less inertia
  • the engine runs faster, no loss of performance.
  • suitable for motorsports, racing or serial vehicles
  • lower fuel consumption
  • significant reduction of the turbo lag
  • precision balancing, bearings are less affected, finely balanced according to DIN ISO 1940
  • including ring gear
  • suitable for either a standard clutch or a high-performance clutch
  • Our flywheels are registration-free as they have no direct effect on the actual performance.

Delivery:

  • 1x lightened high-strength flywheel made of chrome molybdenum for all  1,6l  16V GK engines inPolo 9N Lupo GTI models
  • Installation instructions

Our lightened flywheels are registration-free and therefore do not need to be registered.

1 of 1 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


9 August 2023 21:22

Martin K

Original Schwung gab es keinen mehr für den Lupo GTI. Daher Erleichterten gekauft. Sieht qualitativ hochwertig aus.

  • Which screws can be used?
  • The original bolts can be reinstalled.

  • Which clutch can be used with the Epytec flywheels?
  • You can continue to use the original clutch or an identical Sport / Performance clutch. Please check with the clutch manufacturer whether these are of the same design as the originals. If this is the case, then it will also fit 100%

  • What is the friction coefficient of the flywheel?
  • In principle, the friction coefficient can be assumed to be at least the same as that of the original cast disc. Due to the higher alloyed steel, our pulleys are slightly better than the original cast pulley. Of course, the material of the friction disk also has a major influence here; this must be checked with the manufacturer of the friction disk

  • What material are the flywheels made of?
  • The flywheel is made of 16MnCr (chromium molybdenum) steel, which means it has a density of 7.76 kg/dm³

  • Does the flywheel have a TDC marking and other markings for the ignition?
  • The flywheel has no TDC marking, only the pin on the back, just like the original flywheel. Tip: To adopt the TDC marking, the original flywheel must be turned to the TDC point before disassembly and the new flywheel must be marked in exactly this position.

  • Does the flywheel have the default unbalance or is it balanced to zero?
  • The flywheel is supplied with the default unbalance. Unbalance can be created as follows! We first balance the pulley to 0, then apply a test mass at the specified point, which corresponds exactly to the unbalance. The pulley is then balanced to 0 again with the test mass. If you now remove the test mass, you have exactly the specified unbalance.

  • Do we only sell the ring gear / gearwheel of the flywheels?
  • No, we can only sell the flywheels complete.

  • Why do I have to run in my clutch?
  • The principle of a clutch is similar to that of a brake system. The different materials / surfaces must first adapt to each other. This happens through friction. With standard clutches or organic linings, this happens relatively quickly, as the lining material is "softer" than with sintered metal linings.

Passendes Zubehör

VW Polo 9N Audi S3 335x22 Brake Caliper Adapter Rear Axle
  • ✓ for rear axle VW Polo 9N
  • ✓ brake caliper: Audi S3 8L oder VW Golf  R32
  • ✓ brake disc: VW Phaeton  335x22mm , reference 4E0615601L 

€219.00*
Artikelnummer: 123-Sonder
Kit VW Polo 9N Ibiza 6L Audi A1 Camber Correction Plates Camber Adjustment Rear Axle
  • ✓ Kit of camber correction / adjustment plates for rear axle
  • ✓ suitable for : Fiat Ibiza 6L, VW Polo 9N, Audi A1

€48.74*
Artikelnummer: 703-20N
Steel Braided Brake Line Steel Rear Axle VW Golf 4 R32 Audi A3 S3 A1 Ibiza Polo 9N Brake Conversion
  • ✓ for e.g VW Golf 4 Audi A3 Polo, etc
  • ✓ complete kit for rear and front axle

€224.55*
Artikelnummer: SF103
Clutch Set VW Polo Lupo 9N 1,6l 16V 6-speed 220mm SACHS Flywheel Pressure Plate Clutch Disk torsion Damped Organic
  • ✓ 1x clutch disc 220mm suitable for VW Polo Lupo 9N 1.6l 16V 6-speed
  • ✓ 1x SACHS clutch pressure plate, reinforced 220mm VW Polo Lupo 9N 1,6l 16V 6-speed 
  • ✓ release bearing

€565.82*
Artikelnummer: SAP143
You can find out everything about your order via your -> View customer account