EBC brake discs 334x32 Black-Dash front axle Audi VW TT Golf 4 1.8 T quattro 3.2 VR

Brake caliper adapter for Golf 4 series to install TTRS brake calipers, combined with the original R32 brake dics from Golf 4 R32 ( 334x32 , PCD 5x100). Suitable for following vehicles : Audi A3 (8L) Audi TT (8N) VW Golf 4 VW Bora VW Beetle VW Polo (9N) Seat Ibiza Seat Leon Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: original TTRS brake caliper reference : left  8J0 615 107 ; right   8J0 615 108  brake pads:   reference : 8J0 698 151 E brake disc: Golf 4 R32 334x32 mm , reference : 1J0 615 301AA / 1J0 615 302 A Delivery: 2x brake caliper adapters (see picture) high-strength mounting screws material certificate CAD anylysis for the registration installation tutorial

Brake caliper adaper for Porsche 911 GT3 and 996 turbo (also called Big Red)  Brake calipers combined with the original R32 brake discs from Golf MK4 R32 334x32mm on all VW models  with 5x100 PCD on the front axle. Suitable for all vehicles with plus axle installed in e.g.: VW Golf MK3 2,0l 16V and VR6 GTI VW Passat 2,0l 16V 35i and VR6 GTI VW Corrado 2,0l 16V und VR6 GTI Seat Toledo A reference number and the EPYTEC logo is engraved on our caliper adapters. Thus, it is possible to register your purchase even for series vehicles, according §21 i.V.m. § 19/2 StVZO (German Road License Legislation). Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers: Porsche 911 GT3 ,996 turbo , reference: left 996.351.429 / Brembo number 20.7310.03 + right  996.351.430 / Brembo number :20.7310.04 brake discs: Golf MK4 R32 334x32 mm , reference  1J0 615 301AA and 1J0 615 302 A  brake pads: from original Porsche 911 GT3 + 996 Turbo calipers Delivery: 2x brake caliper adapters (see picture) high strength mounting screws    material certificate

Brake caliper adapter for front axle brake disc system to fix Porsche /Brembo ZR17 6 piston brake calipers with R32 brake disc,diameter 334 x 32mm on all VW with bolt circle connection 5x100 on the front axle. Installed in e.g VW Golf 3 2,0l 16V und VR6 GTI VW Passat 2,0l 16V 35i und VR6 GTI VW Corrado 2,0l 16V und VR6 GTI Seat Toledo  Required material for installation: Brake calipers from the Porsche Cayenne or VW Tuareg (17 inch variant) part number: 7L6 615 123 T and 7L6 615 124 T Brake pads are used by the 18 inch calipers Item No: 7L0 698 151 J Brake discs from the Golf 4 R32 334x32 mm part number 1J0 615 301AA and 1J0 615 302 A  Advantages: Best possible deceleration values and performance, also indispensable for performance increases 17 inch rims can be driven Components come from series production by VW The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Including complete with screw material  Scope of delivery: 2 high resistant adapter-plates allowing the installation of the brake calipers and disc(see photo) 1 Complete set of high resistant srews Template to check whether the brake system fits under your rim Certificate of material;proves the conformity of our product in Germany and simplifies authorization by authorities. Stress analysis / FEM calculation for entry

Brake caliper adapter on Golf MK2 G60 models for conversion to Porsche 996 brake caliper, combined with the Golf MK4 R32 brake discs, 334x32mm. Suitable for the following vehicles with 4x100 hub PCD: Golf MK2 Golf MK3 Passat 35i Corrado Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers: Porsche 996 turbo , reference left 996.351.429 + right 996.351.430 brake discs: Golf 4 R32  334x32 mm , reference 1J0 615 301A and 1J0 615 302 A modification of the disc PCD to 4x100 (possibility of making it directly from EPYTEC) Delivery: 2x brake caliper adapters high-strength mounting screws material certificate Notes/tips: For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plate. For brake conversion on the rear axle, we recommend that you generally proceed as follows: install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Stahlflex-Bremsleitung konfigurieren << always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.

Brake caliper adapter on Golf MK4 series for conversion to 911 GT3 and 996 turbo brake calipers (also called Big Red), combined with the original R32 brake discs from Golf 4 R32 ( 334x32,  5x100 PCD) Suitable for the following vehicles: Audi A3 (8L) Audi TT (8N) VW Golf MK4 VW Bora VW Beetle VW Polo (9N) VW Polo 6R WRC Seat Ibiza 6L Seat Leon 1M A reference number and the EPYTEC logo is engraved on our caliper adapters. Thus, it is possible to register your purchase even for series vehicles, according §21 i.V.m. § 19/2 StVZO (German Road License Legislation). Vorteile dieser Bremsanlage: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers Porsche 911 GT3 und 996 turbo,reference: left 996.351.429 / Brembo reference 20.7310.03 + right 996.351.430 / Brembo reference 20.7310.04 brake pads: from original 911 T3 and 996 turbo calipers brake discs: Golf 4 R32 334x32mm , reference 1J0 615 301AA and 1J0 615 302 A Delivery: 2x brake caliper adapters (see picture) high strength mounting screws    material certificate stress analysis

Brake caliper adapter, front axle, for conversion to Porsche or Brembo 6-piston brake caliper ZR17, combined with the R32 brake discs 334x32mm. The brake calipers are installed on models Porsche Cayenne, VW Touareg and Q7. Suitable for all models of VW / Audi with front axle Vorderachse of front-drive-wheel: Audi A3 (8L) Audi S3 (8L) Audi TT (8N) VW Golf MK4 VW Bora VW Beetle VW Polo (9N) VW Polo 6R WRC Seat Ibiza Seat Leon Important!: The adapter is only suitable for cast wishbones OE: 8N0 407 151 A. These are installed as standard in the Golf 4 R32, Audi S3 8L, and Audi TT 8N 1.8T and the Quattro models. All other models of the Golf 4, Audi A3 series must be converted to this cast wishbone, otherwise no more steering is possible. The stabilizer OE: 1J0411305AF must also be converted in vehicles that do not have the cast wishbone installed as standard. We have the right wishbones in the matching accessories and can be ordered directly. The problem with the wishbone only affects conversions to Z18 and Z17 calipers. With all other adapters that we still have, such as conversion to 4-piston Porsche Boxter, Audi TTRS or 6-piston Porsche Panamera brake calipers for the Golf 4 Audi A3 series, the adapters fit with all wishbones. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: Brake caliper: Porsche Cayenne or VW Tuareg (17 inch variant), reference 7L6 615 123 T + 7L6 615 124 T Brake pads are used by the 18 inch calipers, item-number: 7L0 698 151 J Brake disc: Golf 4 R32 334x32mm, reference 1J0 615 301AA + 1J0 615 302 A Delivery: 2x brake caliper adapters (see pictures)/li> high-strength mounting screws material certificate Stress analysis / FEM calculation for entry Template to check whether the brake system fits under your rim installation instructions We also have suitable adapters to convert to ZR18 6-piston calipers.

Brake caliper adapter, front axle, for  Audi TT A3, etc, to convert to Porsche or Brembo 6-piston ZR18 brake caliper, combined with the R32 334 x 32mm brake discs.These calipers are used as standard for Porsche Cayenne, VW Touareg and Q7. Suitable for the following models of VW/Audi group: Audi A3 (8L) Audi TT (8N) VW Golf MK4 VW Bora VW Beetle VW Polo (9N) Seat Ibiza Seat Leon Important!: The adapter is only suitable for cast wishbones OE: 8N0 407 151 A. These are installed as standard in the Golf 4 R32, Audi S3 8L, and Audi TT 8N 1.8T and the Quattro models. All other models of the Golf 4, Audi A3 series must be converted to this cast wishbone, otherwise no more steering is possible. The stabilizer OE: 1J0411305AF must also be converted in vehicles that do not have the cast wishbone installed as standard. We have the right wishbones in the matching accessories and can be ordered directly. The problem with the wishbone only affects conversions to Z18 and Z17 calipers. With all other adapters that we still have, such as conversion to 4-piston Porsche Boxter, Audi TTRS or 6-piston Porsche Panamera brake calipers for the Golf 4 Audi A3 series, the adapters fit with all wishbones. Required components: brake caliper Porsche Cayenne ZR18 ZL18 , référence 95535142153 +  95535142253 brake disc VW Golf 4 R32  334x32mm  part number: 8N0 615 301 B / 1J0 615 301 AA Delivery: 2x brake caliper adapters (see pictures) copy of vehicle document to simplify the registration high-strength mounting screws Template to check whether the brake system fits under your rim material certificate You also find the corresponding adapter for conversion to ZR17 6-piston brake calipers in our shop (click here)

Brake caliper adapter for the Golf 2, 3 series (narrow axle) to be able to drive the Golf 4 R32 brake disc 334x32mm in connection with the Brembo/Porsche Cayenne ZR 17 brake calipers. Suitable for the following vehicles: Golf MK1 (only with G60 wheel bearing housing) VW Golf MK2 and MK3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Required components: brake calipers: Porsche Cayenne  or Tuareg, reference  7L6 615 123 T + 7L6 615 124 T brake discs: Golf MK4 R32 334x32mm , reference 1J0 615 301AA + 1J0 615 302 A brake pads: from 18 inch calipers reference 7L0 698 151 J Brake disc must be redrill to 4x100 (can also be done in our house) Advantages of this brake system: top deceleration, without comparison with conventional brake discs better engine performance suitable for 17 inch rims components come from the production series of VW thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles including set of mounting screws Delivery: 2x brake caliper adapters for Golf MK1, MK2, MK3, Scirocco Passat Corrado Jetta Polo G60 high strength mounting screws Template to check whether the brake system fits under your rim   material certificate The "nose" on the axle pin / stub must be adapted by cutting / grinding it.

Brake caliper adapter made of high-strength steel alloy for Golf VR6 plus axle to convert to S3 TT 1.8T or R32 brake system Fits for the following models: Passat Corrado Golf 2 3 / GTI 8V / 16V GTI / VR6 or any vehicle with upgraded front axle typ 'plus'. There are 2 possibilities to convert with these adapters! On the 312x25 brake system with the brake caliper, installed in the following vehicles: Golf 4 25 Jahre Jubi GTI/ V5 Golf 4 V6 Audi S3 8L   Audi TT 225 PS Or on the large R32 /S3 brake system (brake disc 334x32 with the original double-piston brake caliper from the R32 /S3) installed in the following vehicles: Golf 4 R32 Audi S3 Audi TT  Advantages: Easy and fast assembly Significantly better perfomance than the standard brake system. Adaptor does not require rectications on your vehicle,therefore easily transformable in its original condition. The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles The adapters are 6mm thick.For the rear we have to also go right to the HA program Adapteri m S3 saddles in connection with the brake disc 280. This can also be found in our store. Scope of delivery: 2x brake adapter for Golf VR6 plus axle on S3 TT 1.8T R32 and S3 brake 4x longer high strength bolts material certificate

Brake caliper adapters for Corrado Golf MK2 MK3 Passat 35i VR6 ti install the TTRS brake calipers, combined with the original R32 brake discs from Golf MK4 R32 (334x32 mm with 5x100 PCD) Suitable for the following vehicles with VR6 engine and VR6 axle: Golf VR6 Corrado VR6 Passat 35i VR6 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Minimum rim size: from 17 inch. Depending on the type and shape of the rims, the inside minimum diameter may vary. Required components: brake caliper:  original TTRS caliper , reference : left 8J0 615 107 + right 8J0 615 108 brake pad: reference 8J0 698 151 E brake disc: Golf MK4 R32 334x32mm , reference : 1J0 615 301AA + 1J0 615 302 A If you have made a conversion to VR6 axle stub , then conform to other vehicles. Delivery: 2x brake caliper adapters (see picture) high strength mounting screws material certificate

Brake caliper adapter for Golf MK3 VR6 series with VR6 axle to convert to the large Golf MK4 V6 Jubi brake system. (brake disc 312x25 , brake caliper Golf 4 V6) Suitable for the following vehicles: Golf VR6 Corrado VR6 Passat 35i VR6 Polo 6r WRC Suitable for other vehicles, if the VR6 Plus axle is installed. The 312x25 brake system was installed in the following vehicles: Golf 4 25 Jahre Jubi GTI/ V5 Golf 4 V6 Audi S3 8L Audi TT 225 PS Advantages: easy and quick assembly significantly better braking than the standard braking system can always be restored to the original state without any problems for the rear axle, we also have adapters in our shop to drive with the rear S3 calipers , combined with the 280 brake disc Required components: brake caliper front original S3 /R32 caliper reference: left 1J0615123E , right 1J0615124E brake caliper support / bracket  S3 /R32 reference : left 1J0615125B , right 1J0615126 brake pads front original S3 /R32   reference: 8D0698151D brake discs front original 312x25 S3 / R32  reference : left 1J0615301AA , right 1J0615302A The adapter plates have a thickness of 6mm and the hole distance is 90mm from center to center hole. Delivery: 2x brake adapters for Golf VR6 16V to S3 TT 1,8T brake material certificate

Brake caliper adapter for front axle brake disc system to fix Porsche /Brembo Panamera 6 piston brake calipers with R32 brake disc,diameter 334 x 32mm on all VW with bolt circle connection 5x100 mm, VR6 engine.Suitable for the narrow VR6 axle and Golf 2 axle when converting to 5 holes, e.g.: Golf 2,3 Corrado  Passat VR6 These calipers are used as standard for Porsche Cayenne, VW Touareg, and Q7. Required material for installation: brake caliper: Porsche Cayenne 958 GTS Panamera, reference 7PP615149J / 7PP615150J (Shaft length from the caliper must be 82mm, see yellow mark on the last picture) brake pads 95835193910 Brake discs Golf 4 R32 334x32 mm part no: 1J0 615 301A and 1J0 615 302 A Advantages: Best possible deceleration values ​​and performance, indispensable even for performance increases Suitable for the narrow VR6 axle and Golf 2 axle when converting to 5 holes, e.g.: Components come from mass production of VW With correct mounting registration with the TÜV possible Including complete screw material Scope of delivery: 2x caliper adapter complete galvanized for Golf 2.3 Passat VR6 Complete screw set high-strength material certificate

Brake caliper adapter on models VW Golf MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, for conversion to the TTRS brake calipers, combined with the original R32 brake dics from Golf 4 R32 ( 334x32 bolt circle/PCD 5x100) Suitable for following vehicles: VW Golf MK2 and MK3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Minimum rim size: from 17 inch rim can be used. Depending on the rim shape and type, the minimum size of the inner diameter can vary Required components: brake caliper: TTRS, reference left 8J0 615 107 + right 8J0 615 108 brake pads: reference 8J0 698 151 E brake disc: Golf MK4 R32  334x32mm, reference  1J0 615 301AA + 1J0 615 302 A Delivery: 2x brake caliper adapters for VW Golf 2 3 G60 Passat Scirocco Polo Corrado Jetta high strength mounting screws material certificate