Installation instructions article No. 303 VW Golf Corrado Passat G60 Aluminum engine mount hydro mount conversion

Here you will find out how to proceed step by step to mount the aluminum racing engine mount for all G60 engines and models.

required tool:

nut SW13
nut SW16
nut SW17

First, the supplied worm screw must be screwed into the new engine mount with a suitable Allen key as far as it will go.

Then the original engine mount must be unscrewed at the top with a SW16 socket.

Raise the engine at a point that is protected against deformation, e.g. the transmission bell, etc., using a jack, transmission jack, etc., until the old engine mount is free.

Loosen the old engine mount on the cross member with an SW13 socket and an SW16 socket. The bearing can then be removed to the side.

Now the new aluminum engine mount can be inserted and fastened with the supplied screws including washers. (The new screw for the cross member is an SW17). The motor can then be lowered again and secured at the top with the screw provided.

Here is the corresponding product for the installation instructions

VW Golf Corrado Passat G60 Aluminum Conversion Engine support

Aluminum racing engine bracket for all types of engines and vehicles G60

€109.35*

Artikelnummer: 303

Do you have any questions or requests?

Then simply contact us via our contact form (click here )