Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

EBC Brake Pads Redstuff Audi VW A4 Cabriolet A6 3.2 FSI quattro 3.2

  • ✓ Registration-free
  • ✓ Redstuff ceramic covering
  • ✓ temperature up to 750°C

The EBC Redstuff ceramic brake pads are the ideal compromise between a very high braking force and a good deceleration value (coefficient of friction 0.5), without unduly stressing the brake disc. Even with a cold brake a perfect braking performance is achieved.This is improving additonnaly with increasing temperature of the brake pads. The effective operating temperature can reach up to 750 ° C. The brake dust development is minimal and the resulting brake dust can easily be washed off with water from the rims.Furthermore, the Redstuff brake pad is characterized by very good heat resistance and minimal brake disc wear.

  • ceramic brake pads for faster road vehicles
  • extremely low and non-aggressive brake dust (very easy to remove)
  • full braking power even with a cold brake
  • eunique high-strenght Brake-In ™ surface coating for optimal braking
  • top 10 Products Award, Innovation Award and MP Test Winner
  • operating temperature up to 750 °
  • beveled corners to avoid brake noise 
  • only little stress for the brake discs
  • powder coated support plates and therefore very anti-corrosive quality
  • no squeaks due to special coating and heat slots
  • ECE R 90 type approved, no problem for registration

Delivery

  • 1x kit of EBC Redstuff brake pads for a complete rear axle 

Tipps, Infos und Hinweise:

  • WVA-Nummer: AUDI 4B3698451 , AUDI 4F0698451 , AUDI 8E0698451C , AUDI 8E0698451H , AUDI 4F0698451F , AUDI 8E0698451N , AUDI 4B3698451A , AUDI 4F0698451G , AUDI 7H0698451A , AUDI 4F0698451H , AUDI 4E0698451A , AUDI 4E4698451A , AUDI 4F0698451C , AUDI 4E0698451B , AUDI 4E4698451 , VW 4F0698451G , VW 7H0698451A , VW 8E0698451N , VW 4F0698451C , VW 4E0698451B , VW 4E4698451 , SEAT 4E0698451B , SEAT 4E4698451 , SKODA 4E0698451B , SKODA 4E4698451

Technical data:

Bremssatteltyp: Weitere Bremssättel
Einbauort: hinten
Bremssatteltyp: Weitere Bremssättel
Einbauort: hinten

1 of 1 reviews

Average rating of 5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


6 April 2018 17:15

Review with rating of 5 out of 5 stars

JOHANNES W

Alles Top, gerne wieder

  • Do the offered brake pads have a brake wear indicator / wear warning contact?
  • Our brake pads are identical to the original brake pads. If you have an original indicator / warning contact, ours also have it.

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

Questions? Click here for the contact form