Gesucht nach VW | Passat Variant | 2.0 16V | 35I, 3A5
- ✓ for all G60 GTI 16V / TDI engines
- ✓ e.g 1,8T Golf 4, Audi A3 with 5 speed gearbox
- ✓ total weight: 4,1 kg / saving weight compared to the original: 4,9 kg
- ✓ reinforced clutch release lever for all 02A and 02J 5 speed gear
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ clutch master cylinder from Passat 35I Golf MK2 GTI G60 VW Corrado, etc
- ✓ block reinforcement plate for all VW / Audi 1.8 liter 16V, G60, 1.9TDI and turbo / compressor engines with oil pump drive via auxiliary shaft
- ✓ for the following engines: MKB. PL, KR, 9A, 6A, ,AFN ABF, PG, 1H, DX, EG
- ✓ baffle plate (complete KIT) made of 1.5mm thick steel for all G60 16V 16 Turbo oil pan
The steel sheets need to be welded directly on the clutch release lever to avoid folding after installation of more resistant clutch or pressure plate.
- ✓ injection rail for conversion from 16V to G60 and turbo. Required for engine conversions with PL, KR, 9A and ABF to G60 and turbo engine block, combined with the standard intake manifold
- ✓ flywheel kit consisting of lightened flywheel, sprung sinterpad clutch disc and pressure plate in reinforced design suitable for VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02JJ
- ✓ VW Golf 2 3 Corrado G60 wishbone reinforcing plate 16V 1,8T 2,0 GTI
- ✓ wheel hubs for conversion to 5x100mm bolt circle/PCD for the front axle Golf MK2, MK3 / Cabriolet, Variant, Golf MK4 Cabriolet, Passat, Variant, Vento, Caddy 2 box, Corrado, Seat Cordoba / Ibiza 2 / Toledo 2
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Aluminum racing engine bracket for all types of engines and vehicles G60
- ✓ reinforced Sachs Motorsport pressure plate for VW Golf Corrado Passat G60 GTI 16V engines
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ flywheel kit, VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02J, consisting of lightened flywheel, spring-loaded, organic clutch disc and pressure plate in reinforced design
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ wheel hub conversion for 5x112 pitsch circle diameter (PCD) on front axle for VW Golf MK2 MK3, Passat Corrado with VR6 axle
- ✓ 1x tension pulley for VW Golf MK1 MK2 MK3 Audi A6 Seat Toledo 1,8 2,0 16V
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ torsion spring clutch disc with organic performance clutch coating/lining
- ✓ transmittable torque [Nm]: 520
- ✓ diameter [mm]: 228
- ✓ number of teeth: 10
- ✓ hub profile: 23x29-10N
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ rear brake caliper support / carrier / bracket for VW Corrado Golf MK1/2/3 Jetta PassatPart number: 357 615 125 C
- ✓ Installation location: front
- ✓ Number of holes: 4
- ✓ Bolt circle: 100
- ✓ Diameter: 256mm
- ✓ Thickness: 20mm
- ✓ Height: 38mm
- ✓ assembly position: rear
- ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI
- ✓ assembly position: front
- ✓ suitable for Seat VW Cordoba Ibiza II 1.8i 16V 2.0i 16V
- ✓ Installation location: front
- ✓ Suitable for Audi Skoda VW A3 Octavia Golf 3
Hexagonal countersunk socket screw high resistance
Type: M10x25
Blank
Class 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ cylinder-head bolts with hexagon socket, flat head, high-strength
- ✓ dimension: M10x30
- ✓ alloy blank
- ✓ quality 10.9
Hexagonal socket head cap screw high resistance entirely thread
Type: M10x40
Thread 1.25
Blank
Quality 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Cylinder head screw with hexagon socket high-strength
Size: M08x75
Surface: galvanized
Quality: 10.9
Hexagonal screw entirely thread
Type: M10x100
Galvanized
Quality: 8.8
Hexagonal screw hight resistance entirely thread
Type: M16x35
Thread: 1.5
Blank
Quality: 10.9
