Gesucht nach VW | Passat Variant | 1.8 G60 Syncro | 35I, 3A5
- ✓ for all G60 GTI 16V / TDI engines
- ✓ e.g 1,8T Golf 4, Audi A3 with 5 speed gearbox
- ✓ total weight: 4,1 kg / saving weight compared to the original: 4,9 kg
- ✓ reinforced clutch release lever for all 02A and 02J 5 speed gear
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ clutch master cylinder from Passat 35I Golf MK2 GTI G60 VW Corrado, etc
- ✓ for front axle: Audi A4, A6, VW Passat YoC 1996-2005
- ✓ brake caliper: Porsche Cayenne oder VW Tuareg ( 18 inch version ), reference 95535142153 / 95535142253
- ✓ brake disc: Mercedes CLA 43 AMG 350x32mm, reference: A1764210212
- ✓ block reinforcement plate for all VW / Audi 1.8 liter 16V, G60, 1.9TDI and turbo / compressor engines with oil pump drive via auxiliary shaft
- ✓ for the following engines: MKB. PL, KR, 9A, 6A, ,AFN ABF, PG, 1H, DX, EG
- ✓ baffle plate (complete KIT) made of 1.5mm thick steel for all G60 16V 16 Turbo oil pan
The steel sheets need to be welded directly on the clutch release lever to avoid folding after installation of more resistant clutch or pressure plate.
- ✓ 2x 280x22mm G60 brake discs with 5x100 bolt / pitch circle, suitable for alle vehicles that have been converted to G60 brakes
- ✓ injection rail for conversion from 16V to G60 and turbo. Required for engine conversions with PL, KR, 9A and ABF to G60 and turbo engine block, combined with the standard intake manifold
- ✓ flywheel kit consisting of lightened flywheel, sprung sinterpad clutch disc and pressure plate in reinforced design suitable for VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02JJ
- ✓ wheel hubs for conversion to 5x100mm bolt circle/PCD for the front axle Golf MK2, MK3 / Cabriolet, Variant, Golf MK4 Cabriolet, Passat, Variant, Vento, Caddy 2 box, Corrado, Seat Cordoba / Ibiza 2 / Toledo 2
- ✓ VW Golf 2 3 Corrado G60 wishbone reinforcing plate 16V 1,8T 2,0 GTI
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Aluminum racing engine bracket for all types of engines and vehicles G60
- ✓ reinforced Sachs Motorsport pressure plate for VW Golf Corrado Passat G60 GTI 16V engines
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
- ✓ 2x 280x22mm G60 brake discs with 5x112 bolt/pitch circle, suitable for all vehicles that have been converted to G60 brakes
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ flywheel kit, VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02J, consisting of lightened flywheel, spring-loaded, organic clutch disc and pressure plate in reinforced design
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ eccentric for article 590 galvanized
- ✓ torsion spring clutch disc with organic performance clutch coating/lining
- ✓ transmittable torque [Nm]: 520
- ✓ diameter [mm]: 228
- ✓ number of teeth: 10
- ✓ hub profile: 23x29-10N
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ complete brake system for front axle: Audi A4 B5 VW Passat
- ✓ brake caliper: Porsche Cayenne ZR18 / ZL18 part no. 95535142153 / 95535142253
- ✓ Brake disc: Mercedes CLA 43 AMG 350x32mm part number: A1764210212
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ assembly position: front
- ✓ torsion spring clutch disc with organic sinterpad clutch coating/lining
- ✓ transmittable torque [Nm]: 520
- ✓ diameter [mm]: 228
- ✓ number of teeth: 28
- ✓ hub profile: 20,3x22,1-28N
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
Hexagonal screw entirely thread
Type: M06x10
Galvanized
Quality: 8.8
- ✓ external diameter: 25mm
- ✓ internal diameter: 12,2mm
- ✓ lenght: 0,5mm
- ✓ material: steel-electrolytically galvanized
- ✓ cross-head countersunk screw
- ✓ size:M06x16
- ✓ alloy: galvanized
- ✓ strength class 8.8
- ✓ brake discs pitch circle diameter / bolt circle / drilling hub bore hole custome-made
- ✓ additional 2nd hole circle / pitch circle drilled in the brake disc
- ✓ turn hub diameter up
- ✓ external diameter: 22mm
- ✓ internal diameter: 11mm
- ✓ length: 57mm
- ✓ material: steel
Hexagonal socket head cap screw high resistance with partial thread
Type: M10x60
Thread 1.0
Blank
Quality 12.9
Hexagonal screw with flange partial thread high resistance
Type: M10x25
Galvanized
Quality: 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength