Gesucht nach VW | Passat Variant | 1.9 TDI | 3B5
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for front axle: Audi A4, A6, VW Passat YoC 1996-2005
- ✓ brake caliper: Porsche Cayenne oder VW Tuareg ( 18 inch version ), reference 95535142153 / 95535142253
- ✓ brake disc: Mercedes CLA 43 AMG 350x32mm, reference: A1764210212
- ✓ for front axle: Audi A4, A6, VW Passat YoC 1996-2005
- ✓ brake caliper: Porsche Cayenne orr VW Tuareg ( 17 inchl version) , reference 7L6 615 123 T and 7L6 615 124 T
- ✓ brake disc: Mercedes CLK 330x32mm , reference 210 421 2612
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ spare part for drive shafts (wheel side) for the VW Golf MK5 MK6 MK7 Audi A3 Seat Toledo Skoda Octavia
- ✓ cuff
- ✓ Zimmermann brake disc 288x25 Manufacturer's ref. no.: 100.1216.52
- ✓ Audi A4 1.8 T quattro TDI VW Passat 1.9 TDI V6 Seat Skoda
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ camber correction / adjustement plates for installation on rear axle. Thanks to this plate you can modify the camber of the rear wheel, negative or positive.
- ✓ complete brake system for front axle: Audi A4 B5 VW Passat
- ✓ brake caliper: Porsche Cayenne ZR18 / ZL18 part no. 95535142153 / 95535142253
- ✓ Brake disc: Mercedes CLA 43 AMG 350x32mm part number: A1764210212
- ✓ for front axle: Audi A4 A6, VW Passat 3B2 3B3
- ✓ brake caliper: 8-piston Audi RS4 B7 , reference 8E0615107 / 8E0615108
- ✓ brake disc: Audi RS4 B7 365x34mm , reference: 8E0615301AB
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ complete brake system for front axle: VW Passat, Audi A4 B5, Audi A6 4B
- ✓ brake calliper: Porsche Cayenne ZL17 / ZR17 part no. 7L6 615 123 T + 7L6 615 124 T
- ✓ Brake disc Mercedes CLK 330x32mm Part No.: 210 421 2612
Brake caliper adapter for rear axle brake system to fix brake discs typ S6 4f diameter 330x22mm in combination with Vw/Audi standard brake calipers. Tailor-made for Audi A6, VW Passat (3B + 3BG ) and Skoda Superb (3U4) with front-wheel drive and serial brake discs typ 256x22mm. Construction year: From ’96 on.
- ✓ rear axle, wheel offset plates on low profile vehicles
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ Reinforced Sachs Motorsport pressure plate for: VW Passat 3bg Audi A4 B5 B6 B7 A6 4B C4 C5 Exeo 3R2 3R5 Skoda Superb 3U4
- ✓ Exactly identical in construction to the standard pressure plate, therefore easy replacement of the standard pressure plate
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ assembly position: rear
- ✓ suitable for Audi A6 Avant 3.0 quattro
- ✓ assembly position: rear
- ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI
- ✓ Installation location: front
- ✓ Suitable for Audi Skoda VW A3 Octavia Golf 3
Hexagonal coupling nut M8x30
Thread right
Galvanized